Journal article
Amorphous-crystalline nanostructured Nd-Fe-B permanent magnets using laser powder bed fusion: metallurgy and magnetic properties
- Abstract:
- Laser powder-bed fusion (PBF-LB), a class of additive manufacturing (AM), has attracted wide interest in the production of Nd-Fe-B permanent magnets, benefiting from the minimisation of waste of rare-earth elements and the post-processing requirements. Most research on PBF-LB Nd-Fe-B has focused on reducing defects in printed parts alongside the improvement of the resultant magnetic properties. Detailed analysis of the microstructure that results in permanent magnetic properties is yet to be published. In this research, a combination of high-resolution microstructural investigations was conducted for this purpose. For the first time, an in-depth analysis of the grain structure in terms of morphology, size distribution, and texture is presented and correlated to the permanent magnetic performance. Melt pools showed a hierarchical grain size distribution of primary Nd2Fe14B phase grains with a polygonal morphology and random crystalline alignment, in addition to a small amount of Nd-rich and Nd-lean precipitates in the matrix of the Ti-rich amorphous grain boundaries. The permanent magnetic properties of this material are mainly determined by the nanostructured Nd2Fe14B grains and the amorphous Ti-rich iron-based intergranular phase but could be weakened by precipitates that act as magnetic pores. Remelting during PBF-LB led to the transformation of the coarse grains of the previously solidified layer to fine ones, favourable for the permanent magnetic properties. The mechanisms of these complex phase formations and transformations during processing and the development of the nanocrystalline microstructure are elucidated in this paper as a basis for informing the optimisation process for microstructural development.
- Publication status:
- Published
- Peer review status:
- Peer reviewed
Actions
Access Document
- Files:
-
-
(Preview, Version of record, pdf, 24.3MB, Terms of use)
-
- Publisher copy:
- 10.1016/j.actamat.2023.119239
Authors
Engineering and Physical Sciences Research Council
More from this funder
- Publisher:
- Elsevier
- Journal:
- Acta Materialia More from this journal
- Volume:
- 259
- Article number:
- 119239
- Publication date:
- 2023-08-10
- Acceptance date:
- 2023-08-08
- DOI:
- EISSN:
-
1873-2453
- ISSN:
-
1359-6454
- Language:
-
English
- Keywords:
- Pubs id:
-
1517714
- Local pid:
-
pubs:1517714
- Deposit date:
-
2023-09-26
- ARK identifier:
Terms of use
- Copyright holder:
- Wu et al.
- Copyright date:
- 2023
- Rights statement:
- © 2023 The Authors. Published by Elsevier Ltd on behalf of Acta Materialia Inc. This is an open access article under the CC BY license.
- Licence:
- CC Attribution (CC BY)
If you are the owner of this record, you can report an update to it here: Report update to this record