Journal article icon

Journal article

The effect of notched noise on flicker detection and discrimination.

Abstract:
Flicker perception was investigated using two-alternative forced-choice detection and discrimination tasks with four different types of external noise: (1) broadband noise, (2) 5-Hz notched-noise--broadband noise with a 5-Hz band centered on the signal frequency removed, (3) 10-Hz notched-noise, and (4) no external noise. The signal was a burst of 10-Hz sinusoidal flicker presented in one of two observation intervals. In discrimination experiments, a pedestal--sinusoidal flicker with the same frequency, duration, and phase as the signal--was added to both observation intervals. With no noise, observers' performance first improved with increasing pedestal modulation, before deteriorating in accordance with Weber's Law, producing the typical "dipper" shaped plot of signal versus pedestal modulation. Noise affects performance, but the dipper effect persisted in each type of noise. The results exclude three models: the ideal-observer in which the pedestal improves performance by specifying the signal exactly; off-frequency-looking models in which the dipper depends on detection by channels tuned to temporal frequencies different from that of the signal; and strict energy detectors. Our data are consistent with signal processing by a single mechanism with an expansive non-linearity for near-threshold signal modulations (with an exponent of six) and a compressive "Weberian" non-linearity for high modulations.
Publication status:
Published

Actions

Access Document

Publisher copy:
10.1167/9.5.21

Authors


Journal:
Journal of vision More from this journal
Volume:
9
Issue:
5
Pages:
21.1-2118
Publication date:
2009-01-01
DOI:
EISSN:
1534-7362
ISSN:
1534-7362


Language:
English
Keywords:
Pubs id:
pubs:244457
UUID:
uuid:f6257e59-df0b-45f6-bd6e-0f0fa17968e2
Local pid:
pubs:244457
Source identifiers:
244457
Deposit date:
2012-12-19
ARK identifier:

Terms of use


Views and Downloads






If you are the owner of this record, you can report an update to it here: Report update to this record

TO TOP