A three-dimensional hybrid finite element/spectral analysis of noise radiation from turbofan inlets

Journal article

This paper describes a new three-dimensional (3D) analysis of tonal noise radiated from non-axisymmetric turbofan inlets. The novelty of the method is in combining a standard finite element discretisation of the acoustic field in the axial and radial coordinates with a Fourier spectral representation in the circumferential direction. The boundary conditions at the farfield, fan face and acoustic liners are treated using the same spectral representation. The resulting set of discrete acoustic equations are solved employing the well-established BICGSTAB or QMR iterative algorithms and a very effective specialised preconditioner based on the axisymmetric mean geometry and flow field. Numerical examples demonstrate the suitability of the new method to engine configurations with realistic 3D features, such as relatively large degrees of asymmetry and spliced acoustic liners. The examples also illustrate the two advantages of the new method over a traditional 3D finite element approach. The new method requires a significantly smaller number of unknowns as relatively few circumferential Fourier modes in the spectral solution ensure an accurate field representation. Also, due to the effective preconditioner, the spectral linear solver benefits from stable iterations at a high rate of convergence. © 2006 Elsevier Ltd. All rights reserved.

Authors: Duta, M; Giles, M

• Publication status: Published
• Publisher: Academic Press
• Journal: JOURNAL OF SOUND AND VIBRATION
• Volume: 296
• Issue: 3
• Pages: 623-642
• Publication date: 2006-09-26
• DOI: 10.1016/j.jsv.2006.03.006
• EISSN: 1095-8568
• ISSN: 0022-460X
• Language: English