Development of a low-latency, high-precision, beam-based feedback system based on cavity BPMs at the KEK ATF2

Conference item

A low-latency, intra-train feedback system employing cavity beam position monitors (BPMs) has been developed and tested at the Accelerator Test Facility (ATF2) at KEK. The feedback system can be operated with either position information from a single BPM to provide local beam stabilisation, or by using position information from two BPMs to stabilise the beam at an intermediate location. The correction is implemented using a stripline kicker and a custom power amplifier, with the feedback calculations being performed on a digital board built around a Field Programmable Gate Array (FPGA). The addition of indium sealing to the BPMs to increase the cavities’ Q-values has led to improvements to the BPM system resolution, with current measurements of the resolution of order 20 nm. The feedback performance was tested with beam trains of two bunches, separated by 280 ns and with a charge of ~1 nC. For single- (two-)BPM feedback, stabilisation of the beam has been demonstrated to below 50 nm (41 nm). Ongoing work to improve the feedback performance further will be discussed.

Authors: Bett, DR; Bodenstein, RMB; Bromwich, T; Burrows, PN; Perry, C

• Publication status: Published
• Peer review status: Peer reviewed
• Publisher: Joint Accelerator Conferences Website
• Host title: 9th International Particle Accelerator Conference (IPAC'18)
• Journal: 9th International Particle Accelerator Conference (IPAC'18)
• Publication date: 2018-06-01
• Acceptance date: 2018-04-30
• DOI: JACoW-IPAC2018-WEPAL025