Engineering low resistance contacts on p-type hydrogenated diamond surfaces

Looi, H; Pang, L; Whitfield, MD; Foord, J; Jackman, R

Conference item

Engineering low resistance contacts on p-type hydrogenated diamond surfaces

Abstract:: Gold is expected to form a relatively low barrier on hydrogenated thin film diamond, and this metallization has therefore been widely used as the `ohmic' contact for electronic devices fabricated using this material. However, gold contacts are not truly `ohmic' and suffer from reliability problems associated with poor adhesion to the diamond surface. Furthermore, the contact properties of this system have not been studied in any detail. For the first time we report the results of a study, carried out using the circular transmission line method, to explore the specific contact resistance (SCR) of differing metallization schemes on hydrogenated p-type CVD diamond. Gold, aluminum and reacted metal-carbide (Au/Ti, Al/Ti) contacts have been characterized. The effects of sample/contact pre- and post-treatments have been studied, including annealing to 600 °C, acid and plasma treatments. Our measurements show that the simple gold contacts exhibit an SCR of 0.04 Ω cm2 with an associated barrier height of 0.39-0.44 eV. These values were obtained for films displaying carrier concentrations of 1017-1019 cm-3. Low specific contact resistance is important for effective device operation, especially in high power situations; previously, on boron doped material, a reacted (carbide) interface has been shown to improve contact resistance and mechanical integrity - typically Au/Ti is used. Our studies show that Au/Ti contacts can be formed on hydrogenated diamond but display rectifying characteristics up to annealing temperatures of 250 °C. However, a low resistance reacted ohmic contact (SCR approximately 0.02 Ω cm2) can be formed if the anneal temperature is increased to 600 °C and is then followed by a careful rehydrogenation step to replace the carriers which are lost during the annealing.

Publication status:: Published

Actions

Email

Email this record

Send the bibliographic details of this record to your email address.

Your Email
Please enter the email address that the record information will be sent to.

-
Your message (optional)
Please add any additional information to be included within the email.
Share
Cite

Cite this record

APA Style

Looi, H., Pang, L., Whitfield, M. D., Foord, J., & Jackman, R. (2000). Engineering low resistance contacts on p-type hydrogenated diamond surfaces. 9(3-6), 975–981.

MLA Style

Looi, H, et al. “Engineering Low Resistance Contacts on p-Type Hydrogenated Diamond Surfaces.” vol. 9, nos. 3-6, 2000, pp. 975–81.

Chicago Style

Looi, H, L Pang, MD Whitfield, J Foord, and R Jackman. 2000. “Engineering Low Resistance Contacts on p-Type Hydrogenated Diamond Surfaces.” 9 (3-6): 975–81.
Print