Journal article icon

Journal article

Numerical modelling and parametric study of the melting behaviour of ice crystal particles

Abstract:
Ice crystal icing has been identified as a risk to flight safety, due to its reduction of engine performance, potential to cause engine damage and flameout. A critical factor in the sticking efficiency of ice crystals is the melting behaviour of ice crystals. This paper presents an ice melting model integrated with surface blowing and porosity. A parametric study is performed to understand the effects of flow conditions (total pressure, humidity, total temperature, Mach number, and slip velocity) and particle properties (particle size, aspect ratio, and porosity factor) on ice melting behaviour. The model is compared against the melting time of single ice particles in an acoustic levitator. The results show that employing sphericity and porosity could improve prediction performance. Surface blowing from evaporation increases melting time and its effect is larger with a higher gas temperature. Ice melting time increases with pressure at high humidity, while an opposite trend is observed at low humidity. Increasing gas temperature, humidity, slip velocity, aspect ratio, and particle temperature can decrease ice melting time, while increasing Mach number, particle size, and porosity factor can increase ice melting time. While wet bulb temperature can be used to evaluate ice melting potential when only one flow parameter is varied, it appears insufficient alone under scenarios where multiple flow parameters are changing simultaneously
Publication status:
Published
Peer review status:
Peer reviewed

Actions

Access Document

Files:
Publisher copy:
10.2514/1.J060351

Authors

More by this author
Institution:
University of Oxford
Division:
MPLS
Department:
Engineering Science
Role:
Author
More by this author
Institution:
University of Oxford
Division:
MPLS
Department:
Engineering Science
Role:
Author
More by this author
Institution:
University of Oxford
Division:
MPLS
Department:
Engineering Science
Role:
Author
ORCID:
0000-0001-7287-8304


Publisher:
American Institute of Aeronautics and Astronautics
Journal:
AIAA Journal More from this journal
Volume:
59
Issue:
11
Pages:
4660-4668
Publication date:
2021-07-20
Acceptance date:
2021-06-05
DOI:
EISSN:
1533-385X
ISSN:
0001-1452


Language:
English
Keywords:
Pubs id:
1180983
Local pid:
pubs:1180983
Deposit date:
2021-06-07
ARK identifier:

Terms of use


Views and Downloads

Views and downloads will return soon






If you are the owner of this record, you can report an update to it here: Report update to this record

TO TOP