Journal article icon

Journal article

Operation of kinetic-inductance travelling wave parametric amplifiers at millimetre wavelengths

Abstract:
It is expected that the operation of microwave Kinetic Inductance Travelling Wave Parametric Amplifiers (KITWPAs) can be extended to the millimetre (mm) and the sub-mm wavelength range as long as the frequency is below the gap frequency of the superconducting film. This paper presents possible mm-wave designs for KITWPAs based on microstrip transmission lines. Our device is designed based on the BCS (Bardeen-Cooper-Schrieffer) model which successfully reproduces the measured transmission profile, gain, bandwidth, and nonlinear response of a fabricated KITWPA operating in the Ka-band, and includes the millimetre-wave dielectric loss determined by fitting the quality factor of a Wband microstrip resonator. We suggest a layout for a KITWPA operating near 220 GHz that can be fabricated using the same superconducting properties as the Ka-band device and can be coupled to a waveguide system. We conclude the paper by extending the 220 GHz design to higher frequency regimes approaching 1 THz.
Publication status:
Published
Peer review status:
Peer reviewed

Actions


Access Document


Publisher copy:
10.1088/1361-6668/ad20fd

Authors


More by this author
Institution:
University of Oxford
Division:
MPLS
Department:
Physics
Sub department:
Astrophysics
Role:
Author
ORCID:
0000-0002-6252-9351


Publisher:
IOP Publishing
Journal:
Superconductor Science and Technology More from this journal
Volume:
37
Article number:
035006
Publication date:
2024-02-01
Acceptance date:
2024-01-12
DOI:
EISSN:
1361-6668
ISSN:
0953-2048


Language:
English
Keywords:
Pubs id:
1598900
Local pid:
pubs:1598900
Deposit date:
2024-01-14

Terms of use



Views and Downloads






If you are the owner of this record, you can report an update to it here: Report update to this record

TO TOP