Volcanic SO2 layer height by TROPOMI/S5P: evaluation against IASI/MetOp and CALIOP/CALIPSO observations

Koukouli, M-E; Michailidis, K; Hedelt, P; Taylor, IA; Inness, A; Clarisse, L; Balis, D; Efremenko, D; Loyola, D; Grainger, RG; Retscher, C

Journal article

Volcanic SO2 layer height by TROPOMI/S5P: evaluation against IASI/MetOp and CALIOP/CALIPSO observations

Abstract:: Volcanic eruptions eject large amounts of ash and trace gases such as sulfur dioxide (SO2) into the atmosphere. A significant difficulty in mitigating the impact of volcanic SO2 clouds on air traffic safety is that these gas emissions can be rapidly transported over long distances. The use of space-borne instruments enables the global monitoring of volcanic SO2 emissions in an economical and risk-free manner. Within the European Space Agency (ESA) Sentinel-5p+ Innovation project, the S5P SO2 layer height (S5P+I: SO2LH) activities led to the improvements of the retrieval algorithm and generation of the corresponding near real-time S5P SO2 LH products. These are currently operationally provided, in near real-time, by the German Aerospace Center (DLR) within the framework of the Innovative Products for Analyses of Atmospheric Composition (INPULS) project. The main aim of this paper is to present its extensive verification, accomplished within the S5P+I: SO2LH project, over major recent volcanic eruptions, against collocated space-borne measurements from the IASI/Metop and CALIOP/CALIPSO instruments as well as assess its impact on the forecasts provided by the Copernicus Atmospheric Monitoring Service (CAMS). The mean difference between S5P and IASI observations for the Raikoke 2019, the Nishinoshima 2020 and the La Soufrière-St Vincent 2021 eruptive periods is ∼ 0.5 ± 3 km, while for the Taal 2020 eruption, a larger difference was found, between 3 ± 3 km and 4 ± 3 km. The comparison of the daily mean SO2 LH further demonstrates the capabilities of this near real-time product, with slopes between 0.8 and 1 and correlation coefficients ranging between 0.6 and 0.8. Comparisons between the S5P SO2 LH and the CALIOP/CALIPSO ash plumes revealed an expected bias at −2.5 ± 2 km, considering that the injected SO2 and ash plume locations do not always coincide over an eruption. Furthermore, the CAMS assimilation of the S5P SO2 LH product led to much improved model output against the non-assimilated IASI LH, with a mean difference of 1.5 ± 2 km, compared to the original CAMS analysis, and improved the geographical spread of the Raikoke volcanic plume following the eruptive days.

Publication status:: Published

Actions

Email

Email this record

Send the bibliographic details of this record to your email address.

Your Email
Please enter the email address that the record information will be sent to.

-
Your message (optional)
Please add any additional information to be included within the email.
Cite

Cite this record

APA Style

Koukouli, M.-E., Michailidis, K., Hedelt, P., Taylor, I. A., Inness, A., Clarisse, L., Balis, D., Efremenko, D., Loyola, D., Grainger, R. G., & Retscher, C. (2022). Volcanic SO2 layer height by TROPOMI/S5P: evaluation against IASI/MetOp and CALIOP/CALIPSO observations. Atmospheric Chemistry and Physics , 22(8), 5665–5683.

MLA Style

Koukouli, M.-E., et al. “Volcanic SO2 Layer Height by TROPOMI/S5P: Evaluation against IASI/MetOp and CALIOP/CALIPSO Observations.” Atmospheric Chemistry and Physics , vol. 22, no. 8, Copernicus Publications, 2022, pp. 5665–83.

Chicago Style

Koukouli, M-E, K Michailidis, P Hedelt, IA Taylor, A Inness, L Clarisse, D Balis, et al. 2022. “Volcanic SO2 Layer Height by TROPOMI/S5P: Evaluation against IASI/MetOp and CALIOP/CALIPSO Observations.” Atmospheric Chemistry and Physics 22 (8): 5665–83.
Share
Print