Single-step synthesis of Cs3Bi2I9 nanocrystals for scalable direct X-ray detectors

Journal article

Lead-free perovskite-inspired materials have emerged as promising candidates for direct X-ray detection. However, in the early exploration of emerging materials, the focus was on large single crystals. Herein, we report a facile, scalable, single-step synthesis of high-quality Cs3Bi2I9 nanocrystals (NCs) directly from their precursor powders through an ultrasonication approach. The large-scale synthesis of the NCs allowed for the production of 0.78 cm2 pellets used in the fabrication of X-ray detection devices, which exhibit a high bulk resistivity of 1 × 1011 Ω cm and a low dark current density of 3.3 nA cm–2 under an applied bias of 50 V (357 V cm–1 electric field). These devices achieve a limit detection of 108 nGyair s–1, an order of magnitude improvement over the a-Se used in commercial medical imaging, along with stable current under continuous X-ray exposure with a peak energy of 35 keVp. Finally, we demonstrate the scale-up of these detectors by producing thick films 9 cm2 in area, achieving a performance comparable to that of the detectors based on pellets.

Authors: Babu, R; Ghosh, J; Schrenker, NJ; Dudipala, KR; Huang, Y-T

• Publication status: Published
• Peer review status: Peer reviewed
• Publisher: American Chemical Society
• Journal: ACS Energy Letters
• Volume: 10
• Issue: 12
• Pages: 6092-6103
• Publication date: 2025-11-11
• Acceptance date: 2025-11-05
• DOI: 10.1021/acsenergylett.5c02509
• EISSN: 2380-8195
• ISSN: 2380-8195
• Language: English