Electrospinning nonspinnable sols to ceramic fibers and springs

Journal article

Electrospinning has been applied to produce ceramic fibers using sol gel-based spinning solutions consisting of ceramic precursors, a solvent, and a polymer to control the viscosity of the solution. However, the addition of polymers to the spinning solution makes the process more complex, increases the processing time, and results in porous mechanically weak ceramic fibers. Herein, we develop a coelectrospinning technique, where a nonspinnable sol (<10 mPa s) consisting of only the ceramic precursor(s) and solvent(s) is encapsulated inside a polymeric shell, forming core-shell precursor fibers that are further calcined into ceramic fibers with reduced porosity, decreased surface defects, uniform crystal packing, and controlled diameters. We demonstrate the versatility of this method by applying it to a series of nonspinnable sols and creating high-quality ceramic fibers containing TiO₂, ZrO₂, SiO₂, and Al₂O₃. The polycrystalline TiO₂ fibers possess excellent flexibility and a high Young's modulus reaching 54.3 MPa, solving the extreme brittleness problem of the previously reported TiO₂ fibers. The single-component ZrO₂ fibers exhibit a Young's modulus and toughness of 130.5 MPa and 11.9 KJ/m³, respectively, significantly superior to the counterparts prepared by conventional sol-gel electrospinning. We also report the creation of ceramic fibers in micro- and nanospring morphologies and examine the formation mechanisms using thermomechanical simulations. The fiber assemblies constructed by the helical fibers exhibit a density-normalized toughness of 3.5-5 times that of the straight fibers due to improved fracture strain. This work expands the selection of the electrospinning solution and enables the development of ceramic fibers with more attractive properties.

Authors: Dong, S; Maciejewska, BM; Schofield, RM; Hawkins, N; Siviour, CR

• Publication status: Published
• Peer review status: Peer reviewed
• Publisher: American Chemical Society
• Journal: ACS Nano
• Volume: 18
• Issue: 21
• Pages: 13538–13550
• Place of publication: United States
• Publication date: 2024-05-08
• Acceptance date: 2024-04-24
• DOI: 10.1021/acsnano.3c12659
• EISSN: 1936-086X
• ISSN: 1936-0851
• Pmid: 38717374
• Language: English
• Keywords: sol−gel synthesis; ceramic nanofiber; helical structure; core−shell fiber; coaxial electrospinning