Journal article
Identifying turbulent spots in transitional boundary layers
- Abstract:
- An artificial turbulent spot is simulated in a zero free-stream turbulence base flow and a base flow with organised streaks. Six identification methods are used in order to isolate the turbulent spot from the surrounding non-turbulent fluid. These are (i) instantaneous wall-normal velocity, v′, (ii) instantaneous spanwise velocity, w′, (iii) instantaneous turbulent dissipation, (iv) λ2 - criterion, (v) Q - criterion and (vi) gradient of the Finite Time Lyapunov Exponent. All methods are effective in isolating the turbulent spot from the streaks. The robustness of each technique is determined from the sensitivity of the maximum spot dimensions to changes in threshold level. The Q-criterion shows the least sensitivity for the zero free-stream turbulence case and the instantaneous turbulent dissipation technique is least sensitive in the organised streaks case. For both cases the v′ technique was the most sensitive to changes in threshold level. Copyright © 2011 by ASME.
Actions
Access Document
- Publisher copy:
- 10.1115/GT2011-46385
Authors
- Journal:
- Proceedings of the ASME Turbo Expo More from this journal
- Volume:
- 5
- Issue:
- PARTS A AND B
- Pages:
- 1859-1868
- Publication date:
- 2011-01-01
- DOI:
- Language:
-
English
- Pubs id:
-
pubs:369443
- UUID:
-
uuid:96d92265-2ac5-479d-89d2-0bd0b3b57de1
- Local pid:
-
pubs:369443
- Source identifiers:
-
369443
- Deposit date:
-
2013-11-16
- ARK identifier:
Terms of use
- Copyright date:
- 2011
If you are the owner of this record, you can report an update to it here: Report update to this record