Using laser range data for 3D SLAM in outdoor environments

Conference item

Traditional Simultaneous Localization and Mapping (SLAM) algorithms have been used to great effect in flat, indoor environments such as corridors and offices. We demonstrate that with a few augmentations, existing 2D SLAM technology can be extended to perform full 3D SLAM in less benign, outdoor, undulating environments. In particular, we will use data acquired with a 3D laser range finder. We use a simple segmentation algorithm to separate the data stream into distinct point clouds, each referenced to a vehicle position. The SLAM technique we then adopt inherits much from 2D Delayed State (or scan-matching) SLAM in that the state vector is an ever growing stack of past vehicle positions and inter-scan registrations are used to form measurements between them. The registration algorithm used is a novel combination of previous techniques carefully balancing the need for maximally wide convergence basins, robustness and speed. In addition, we introduce a novel post-registration classification technique to detect matches which have converged to incorrect local minima. © 2006 IEEE.

Authors: Cole, D; Newman, P; IEEE

• Publication status: Published
• Host title: 2006 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA), VOLS 1-10
• Volume: 2006
• Pages: 1556-1563
• Publication date: 2006-01-01
• DOI: 10.1109/ROBOT.2006.1641929
• ISSN: 1050-4729
• ISBN: 0780395050
• Keywords: point cloud segmentation; mobile robotics; 3D laser data; outdoor 3D SLAM; delayed state EKF