Solidification of binary aqueous solutions under periodic cooling. Part 1. Dynamics of mushy-layer growth

Journal article

We present studies of the solidification of binary aqueous solutions that undergo time-periodic cooling from below. We develop an experiment for solidification of aqueous NH4Cl solutions, where the temperature of the cooling boundary is modulated as a simple periodic function of time with independent variations of the modulation amplitude and frequency. The thickness of the mushy layer exhibits oscillations about the background growth obtained for constant cooling. We consider the deviation given by the difference between states with modulated and fixed cooling, which increases when the modulation amplitude increases but decreases with increasing modulation frequency. At early times, the deviation amplitude is consistent with a scaling argument for growth with quasi-steady modulation. In situ measurements of the mush temperature reveal thermal waves propagating through the mushy layer, with amplitude decaying with height within the mushy layer, whilst the phase lag behind the cooling boundary increases with height. This also leads to phase lags in the variation of the mushy-layer thickness compared to the boundary cooling. There is an asymmetry of the deviation of mushy-layer thickness: during a positive modulation (where the boundary temperature increases at the start of a cycle) the peak thickness deviation has a greater magnitude than the troughs in a negative modulation mode (where the boundary temperature decreases at the start of the cycle). A numerical model is formulated to describe mushy-layer growth with constant bulk concentration and turbulent heat transport at the mush–liquid interface driven by compositional convection associated with a finite interfacial solid fraction. The model recovers key features of the experimental results at early times, including the propagation of thermal waves and oscillations in mushy-layer thickness, although tends to overpredict the mean thickness.

Authors: Ding, G; Wells, A; Zhong, J

• Publication status: Published
• Peer review status: Peer reviewed
• Publisher: Cambridge University Press
• Journal: Journal of Fluid Mechanics
• Volume: 870
• Issue: 2019
• Pages: 121-146
• Publication date: 2019-05-07
• Acceptance date: 2019-03-25
• DOI: 10.1017/jfm.2019.256
• EISSN: 1469-7645
• ISSN: 0022-1120
• Keywords: FFR