Journal article
Dental resin monomer enables unique NbO2/carbon lithium-ion battery negative electrode with exceptional performance
- Abstract:
- Niobium dioxide (NbO2) features a high theoretical capacity and an outstanding electron conductivity, which makes it a promising alternative to the commercial graphite negative electrode. However, studies on NbO2 based lithium-ion battery negative electrodes have been rarely reported. In the present work, NbO2 4 nanoparticles homogeneously embedded in carbon matrix are synthesized using a dental resin monomer (bisphenol A glycidyl dimethacrylate, Bis-GMA) as solvent and carbon source and niobium ethoxide (NbETO) as the precursor. Thermal polymerization and calcination under Ar/H2 atmosphere at 900 °C are applied, to synthesize the NbO2/carbon nanohybrid in a facile scalable way. It is revealed that a low Bis-GMA/NbETO mass ratio (from 1:1 to 1:2) enables the conversion of Nb (V) to Nb (IV) due to increased porosity induced by alcoholysis reaction between the NbETO and Bis-GMA. The fundamental mechanisms responsible for the formation of NbO2 are elaborated, which involve the reduction of Nb (V) by in situ generated carbon monoxide. The as-prepared NbO2/carbon nanohybrid delivers a reversible capacity of 225 mA h g-1 after 500 cycles at 1 C rate with the Coulombic efficiency of more than 99.4 % in the cycles. Various experimental and theoretical approaches including solid state NMR, ex situ XRD, differential electrochemical mass spectrometry, and density functional theory (DFT) are utilized to understand the fundamental lithiation/delithiation mechanisms of the NbO2/carbon nanohybrid. The results suggest that the NbO2/carbon nanohybrid bearing high capacity, long cycle life and low gas-evolution is promising for lithium storage applications.
- Publication status:
- Published
- Peer review status:
- Peer reviewed
Actions
Access Document
- Files:
-
-
(Preview, Version of record, pdf, 2.2MB, Terms of use)
-
(Preview, Supplementary materials, pdf, 1.4MB, Terms of use)
-
- Publisher copy:
- 10.1002/adfm.201904961
Authors
+ Engineering and Physical Sciences Research Council
More from this funder
- Funder identifier:
- https://ror.org/0439y7842
- Grant:
- FIGR007
- Publisher:
- Wiley
- Journal:
- Advanced Functional Materials More from this journal
- Volume:
- 29
- Issue:
- 43
- Article number:
- 1904961
- Publication date:
- 2019-08-16
- Acceptance date:
- 2019-07-26
- DOI:
- EISSN:
-
1616-3028
- ISSN:
-
1616-301X
- Language:
-
English
- Keywords:
- Pubs id:
-
pubs:1036166
- UUID:
-
uuid:624f8e84-fd17-4170-8a12-cdacec0e94c4
- Local pid:
-
pubs:1036166
- Source identifiers:
-
1036166
- Deposit date:
-
2019-07-30
Terms of use
- Copyright holder:
- Ji et al
- Copyright date:
- 2019
- Rights statement:
- © 2019 The Authors published by Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.
- Licence:
- CC Attribution (CC BY)
If you are the owner of this record, you can report an update to it here: Report update to this record