Journal article icon

Journal article

The AutoQual ultrasound elastography method for quantitative assessment of lateral strain in post-rupture Achilles tendons.

Abstract:
This paper presents the AutoQual elastography method: a novel algorithm that improves the quality of 2D displacement field calculation from ultrasound radio frequency (RF) sequences of acutely ruptured Achilles tendons to determine image-lateral strain fields and has potential use for ligaments and muscles. This method uses 2D bicubic spline interpolation of the RF signal, Quality Determined Search, Automatic Search Range and Adaptive Block Size components as a novel combination that is designed to improve continuity and decrease displacement field noise, especially in areas of low signal strength. We present a simple experiment for quantitatively comparing the AutoQual method to a multiscale (MS) elastography method from ultrasound RF sequences of a 5% agar phantom for rigid body motion and known lateral strain loads with speeds up to 5mm/s. We finally present examples of four in vivo Achilles tendons in various damage states and with manual or artificially controlled passive flexion of the foot. Results show that the AutoQual method offers a substantial improvement on the MS method, achieving similar performance for rigid body tracking at all speeds, a lower normalized square error at all strains induced and a more continuous strain field at higher compression rates. AutoQual also showed a greater average normalized cross correlation for image blocks in the area of interest, a lower standard deviation of the strain field and a visually more acceptable point tracking for in vivo examples. This work demonstrates lateral ultrasound elastography which is robust to the complex passive motion of the Achilles and to various imaging artifacts associated with imaging tendon rupture. This method potentially has a wide clinical application for assessing in vivo strains in and hence mechanical function of any near skin surface tissues that are longitudinally loaded.
Publication status:
Published

Actions


Access Document


Publisher copy:
10.1016/j.jbiomech.2013.07.044

Authors


More by this author
Institution:
University of Oxford
Division:
MPLS
Department:
Engineering Science
Role:
Author
More by this author
Institution:
University of Oxford
Division:
MPLS
Department:
Engineering Science
Role:
Author


Journal:
Journal of biomechanics More from this journal
Volume:
46
Issue:
15
Pages:
2695-2700
Publication date:
2013-10-01
DOI:
EISSN:
1873-2380
ISSN:
0021-9290


Language:
English
Keywords:
Pubs id:
pubs:419433
UUID:
uuid:42cd3854-8a93-4ebc-b54f-6fdc540b5afa
Local pid:
pubs:419433
Source identifiers:
419433
Deposit date:
2013-11-16

Terms of use



Views and Downloads






If you are the owner of this record, you can report an update to it here: Report update to this record

TO TOP