Porous materials for thermal management under extreme conditions.

Journal article

A brief analysis is presented of how heat transfer takes place in porous materials of various types. The emphasis is on materials able to withstand extremes of temperature, gas pressure, irradiation, etc. i.e. metals and ceramics, rather than polymers. A primary aim is commonly to maximize either the thermal resistance (i.e. provide insulation) or the rate of thermal equilibration between the material and a fluid passing through it (i.e. to facilitate heat exchange). The main structural characteristics concern porosity (void content), anisotropy, pore connectivity and scale. The effect of scale is complex, since the permeability decreases as the structure is refined, but the interfacial area for fluid-solid heat exchange is, thereby, raised. The durability of the pore structure may also be an issue, with a possible disadvantage of finer scale structures being poor microstructural stability under service conditions. Finally, good mechanical properties may be required, since the development of thermal gradients, high fluid fluxes, etc. can generate substantial levels of stress. There are, thus, some complex interplays between service conditions, pore architecture/scale, fluid permeation characteristics, convective heat flow, thermal conduction and radiative heat transfer. Such interplays are illustrated with reference to three examples: (i) a thermal barrier coating in a gas turbine engine; (ii) a Space Shuttle tile; and (iii) a Stirling engine heat exchanger. Highly porous, permeable materials are often made by bonding fibres together into a network structure and much of the analysis presented here is oriented towards such materials.

Authors: Clyne, T; Golosnoy, I; Tan, J; Markaki, A

• Publication status: Published
• Journal: Philosophical transactions. Series A, Mathematical, physical, and engineering sciences
• Volume: 364
• Issue: 1838
• Pages: 125-146
• Publication date: 2006-01-01
• DOI: 10.1098/rsta.2005.1682
• EISSN: 1471-2962
• ISSN: 1364-503X
• Language: English
• Keywords: Energy Transfer; Porosity; Nanostructures; Thermal Conductivity; Hot Temperature; Molecular Conformation; Computer Simulation; Polymers; Biocompatible Materials; Models, Molecular; Models, Chemical