Unsteady phenomena at the combustor-turbine interface

Journal article

The combustor-turbine interface in a gas turbine is characterised by complex, highly unsteady flows. In a combined experimental and large eddy simulation (LES) study including realistic combustor geometry, the standard model of secondary flows in the nozzle guide vanes (NGV) is found to be oversimplified. A swirl core is created in the combustion chamber which convects into the first vane passages. Four main consequences of this are identified: variation in vane loading; unsteady heat transfer on vane surfaces; unsteadiness at the leading edge horseshoe vortex, and variation in the position of the passage vortex. These phenomena occur at relatively low frequencies, from 50–300 Hz. It seems likely that these unsteady phenomena result in non-optimal film cooling, and that by reducing unsteadiness designs with greater cooling efficiency could be achieved. Measurements were performed in a high speed test facility modelling a large industrial gas turbine with can combustors, including nozzle guide vanes and combustion chambers. Vane surfaces and endwalls of a nozzle guide vane were instrumented with 384 high speed thin film heat flux gauges, to measure unsteady heat transfer. The high resolution of measurements was such to allow direct visualisation in time of large scale turbulent structures over the endwalls and vane surfaces. A matching LES simulation was carried out in a domain matching experimental conditions including upstream swirl generators and transition duct. Data reduction allowed time-varying LES data to be recorded for several cycles of the unsteady phenomena observed. The combination of LES and experimental data allows physical explanation and visualisation of flow events.

Authors: Shaikh, F; Rosic, B

• Publication status: Published
• Peer review status: Peer reviewed
• Publisher: Global Power and Propulsion Society
• Journal: Journal of the Global Power and Propulsion Society
• Volume: 5
• Pages: 202-215
• Publication date: 2021-11-23
• DOI: 10.33737/jgpps/143042
• ISSN: 2515-3080
• Language: English
• Keywords: Combustion; Turbulence; Detached eddy simulation; Nozzle; Reynolds-averaged Navier–Stokes equations; Mechanical engineering; Large eddy simulation; Turbine; Mechanics; Vortex; Combustor; Flow (mathematics); Physics; Engineering; Materials science; Heat transfer; Chemistry; Combustion chamber; Flow visualization