Two-phase Coriolis mass flow metering with high viscosity oil

Journal article

Previous work has described the use of Coriolis mass flow metering for multiphase flows, with applications in the oil and gas industry. This paper describes the development and testing of a Coriolis two-phase flow metering solution for nitrogen/synthetic oil mixtures with viscosities ranging from 50 cSt to 500 cSt, and with Gas Volume Fractions (GVFs) ranging from 0% to 90%. Formal trials took place at the UK National Flow Laboratory. A single synthetic oil was used; its viscosity was adjusted by controlling temperature. The results show that Coriolis metering is well suited to high viscosity oil/gas mixtures: in the formalized trials, mass flow errors for gas were mostly within 5% and for liquid were mostly within 2.5%. Achieving this accuracy up to 90% GVF represents an advance on previous work, which has been limited to around 50% GVF for low viscosity oils in two-phase and three-phase mixtures.

Authors: Tombs, M; Zhou, F; Henry, M

• Publication status: Published
• Peer review status: Peer reviewed
• Publisher: Elsevier
• Journal: Flow Measurement and Instrumentation More from this journal
• Volume: 59
• Pages: 23-27
• Publication date: 2017-11-22
• Acceptance date: 2017-11-21
• DOI: 10.1016/j.flowmeasinst.2017.11.009
• ISSN: 0955-5986
• Keywords: oil and gas; Two phase flow; mass flow; multi phase flow; high viscosity oil; neural net; Coriolis