ITER in-vessel coil design and RandD

Journal article

ITER will incorporate In Vessel Coils (IVCs) as a method of stabilizing "Edge Localized Modes" (ELM) and providing "Vertical Stabilization" (VS). To meet the ELM and VS Coil requirements strong coupling with the plasma is required so that it is necessary for the coils to be installed in the vessel just behind the blanket shield modules. Due to this close proximity to the plasma the radiation and temperature environment is severe and conventional electrical insulation materials and processes cannot be used. The development of mineral insulated conductor technology has been required in the IVC design to deal with this high radiation and high temperature environment. While mineral insulated conductor technology is not new, building a large magnet with high current carrying capability and a conductor diameter larger than the mineral insulated conductor currently manufactured requires RandD and the extension of existing technologies. A 59mm Stainless Steel Jacketed Mineral Insulated Conductor (SSMIC) using MgO is being developed for this application. The IVC ELM and VS coils design includes both the development of the fabrication techniques for the SSMIC and the design and analysis of the ELM and VS Coil assemblies. © 2011 IEEE.

Authors: Kalish, M; Heitzenroeder, P; Brooks, A; Bryant, L; Chrzanowski, J

• Journal: Proceedings - Symposium on Fusion Engineering
• Publication date: 2011-01-01
• DOI: 10.1109/SOFE.2011.6052219
• Language: English
• Keywords: In Vessel Coils; Stainless Steel Mineral Insulated Conductor; VS; ELM; SSMIC; Edge Localized Modes; MgO; Magnesium Oxide Insulation; IVC; ITER; Vertical Stabilization