Journal article icon

Journal article

On the application of principles of artificial intelligence for eigenstrain reconstruction of volumetric residual stresses in non-uniform Inconel alloy 740H weldments

Abstract:
The eigenstrain theory provides a range of fruitful concepts for advanced modelling of the behaviour of materials and components obtained using sophisticated manufacturing routes, their response to thermal and mechanical loading, and deformation under fatigue and creep conditions. In recent years the method has been shown to be able to provide predictions of residual stresses for a limited range of processing and simulated service conditions for which experimental data is available. The authors recently presented advances in the use of eigenstrain-based analysis to include accurate determination of the domain and boundaries of eigenstrain fields in the weld zone. This approach allowed effective modelling of large-scale components and the determination of volumetric distributions of residual stresses through the use of additional model coefficients that need to be determined. Due to the non-linear dependence of the prediction on these parameters, the algorithm of the decision-making process has a profound influence on the cost of the simulation, and the reliability of its output. To address this challenge, the principles of Artificial Intelligence were adopted for use in the eigenstrain contour method to develop fuzzy Finite Element Model (fFEM) for the eigenstrain the reconstruction of residual stresses in large structures. The deterministic finite element eigenstrain model uses contour measurements for reconstruction process, and the developed fFEM behaves as an artificial agent to determine the coefficients of the deterministic finite element eigenstrain model. As an example application, as-welded and post-weld heat-treated specimens of non-uniform weldments of Inconel Alloy 740H were investigated using the proposed model. The results were verified using displacement measurements and residual stress calculations of the contour method. The determination of model coefficients by artificial agent allowed effective reconstruction of volumetric residual stresses in complex shaped components using limited data without the requirement of costly and destructive multi-cut experimental procedures.
Publication status:
Published
Peer review status:
Peer reviewed

Actions

Access Document

Files:
Publisher copy:
10.1016/j.finel.2018.11.004

Authors

More by this author
Institution:
University of Oxford
Division:
MPLS Division
Department:
Engineering Science
Role:
Author
More by this author
Institution:
University of Oxford
Division:
MPLS
Department:
Engineering Science
Oxford college:
Trinity College
Role:
Author
ORCID:
0000-0002-3558-5198


Engineering and Physical Sciences Research Council More from this funder
Grant:
EP/P005381/1
European Commission More from this funder
Grant:
794957 (RESTREIG
Scientific and Technological Research Council of Turkey More from this funder
Grant:
TUBITAK-BIDEB-2219


Publisher:
Elsevier
Journal:
Finite Elements in Analysis and Design More from this journal
Volume:
155
Pages:
43-51
Publication date:
2018-12-04
Acceptance date:
2018-11-26
DOI:
ISSN:
0168-874X


Keywords:
Pubs id:
pubs:957302
UUID:
uuid:11a91a80-16a7-4cb3-bb67-f838b88c00de
Local pid:
pubs:957302
Source identifiers:
957302
Deposit date:
2019-01-07
ARK identifier:

Terms of use


Views and Downloads

Views and downloads will return soon






If you are the owner of this record, you can report an update to it here: Report update to this record

TO TOP