The HARP detector at the CERN PS

Journal article

HARP is a high-statistics, large solid angle experiment to measure hadron production using proton and pion beams with momenta between 1.5 and 15 GeV/c impinging on many different solid and liquid targets from low to high Z. The experiment, located in the T9 beam of the CERN PS, took data in 2001 and 2002. For the measurement of momenta of produced particles and for the identification of particle types, the experiment includes a large-angle spectrometer, based on a Time Projection Chamber and a system of Resistive Plate Chambers, and a forward spectrometer equipped with a set of large drift chambers, a threshold Cherenkov detector, a time-of-flight wall and an electromagnetic calorimeter. The large angle system uses a solenoidal magnet, while the forward spectrometer is based on a dipole magnet. Redundancy in particle identification has been sought, to enable the cross-calibration of efficiencies and to obtain a few percent overall accuracy in the cross-section measurements. Detector construction, operation and initial physics performances are reported. In addition, the full chain for data recording and analysis, from trigger to the software framework, is described. © 2006 Elsevier B.V. All rights reserved.

Authors: Catanesi, MG; Muciaccia, M; Radicioni, E; Simone, S; Edgecock, R

• Publication status: Published
• Journal: NUCLEAR INSTRUMENTS and METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT
• Volume: 571
• Issue: 3
• Pages: 527-561
• Publication date: 2007-02-11
• DOI: 10.1016/j.nima.2006.08.132
• ISSN: 0168-9002
• Language: English
• Keywords: particle detectors