Journal article

Direct ink-jet deposition of ceramic green bodies: I - Formulation of build materials

Abstract:: A conventional rapid prototyping technology has been used to build prototypes using direct deposition through a drop-on-demand ink-jet printing system. Al2O3-filled waxes have been developed with viscosity values close to those of the materials used in commercial printing systems. Commercial dispersants based on stearic acid and sterylamine have been studied and stable ceramic suspensions with ceramic volume fractions in the range 20-40 volume% produced with suitable viscosity. A suspension of 20% Al2O3 in an alkane wax has been successfully printed.

Publication status:: Published

Actions

Email

Email this record

Send the bibliographic details of this record to your email address.

Your Email
Please enter the email address that the record information will be sent to.

-
Your message (optional)
Please add any additional information to be included within the email.
Share
Cite

Cite this record

APA Style

Seerden, K., Reis, N., Derby, B., Grant, P., Halloran, J., & Evans, J. (1999). Direct ink-jet deposition of ceramic green bodies: I - Formulation of build materials. SOLID FREEFORM AND ADDITIVE FABRICATION, 542, 141–146.

MLA Style

Seerden, K, et al. “Direct Ink-Jet Deposition of Ceramic Green Bodies: I - Formulation of Build Materials.” SOLID FREEFORM AND ADDITIVE FABRICATION, vol. 542, 1999, pp. 141–46.

Chicago Style

Seerden, K, N Reis, B Derby, P Grant, J Halloran, and J Evans. 1999. “Direct Ink-Jet Deposition of Ceramic Green Bodies: I - Formulation of Build Materials.” SOLID FREEFORM AND ADDITIVE FABRICATION 542: 141–46.
Print

Authors

+ Seerden, K More by this author

Role:: Author

+ Reis, N More by this author

Role:: Author

+ Derby, B More by this author

Role:: Author

+ Grant, P More by this author

Institution:: University of Oxford
Division:: MPLS
Department:: Materials
Role:: Author

+ Halloran, J More by this author

Role:: Author

More authors...

Journal:: SOLID FREEFORM AND ADDITIVE FABRICATION More from this journal
Volume:: 542
Pages:: 141-146
Publication date:: 1999-01-01
ISSN:: 0272-9172

Language:: English
Pubs id:: pubs:15379
UUID:: uuid:0bc29f2c-5ec4-4ac0-9331-dd7b2a266ba2
Local pid:: pubs:15379
Source identifiers:: 15379
Deposit date:: 2012-12-19
ARK identifier:: ark:/29072/ora_0bc29f2c5ec44ac09331dd7b2a266ba2

Terms of use

Copyright date:: 1999

Licence:: Terms and Conditions of Use for Oxford University Research Archive

Views and Downloads

About views and downloads

If you are the owner of this record, you can report an update to it here: Report update to this record

TO TOP