Journal article icon

Journal article

Characterisation of deuterium distributions in corroded zirconium alloys using high-resolution SIMS imaging

Abstract:
Hydrogen diffusion through the oxide grown on Zr alloys by aqueous corrosion processes plays a critical role in determining the rate of hydrogen pickup (HPU) which can result in embrittlement of fuel cladding and limit the burnup of the nuclear fuel it encapsulates. Mapping the hydrogen/deuterium distributions in these oxide layers, especially in the barrier layer close to the metal/oxide interface, is a powerful way to understand the mechanism of both oxidation and hydrogen pickup. Here we have characterised by high-resolution SIMS analysis the deuterium distribution in oxide layers on a series of Zr alloys, including autoclave-oxidised Zircaloy-4, Zr-1Nb and Zr-2.5Nb alloys, and in-flux and out-of-flux corroded Zr-2.5Nb samples. Pre-transition Zircaloy-4 samples show a high deuterium trapping ratio in the oxide and a higher diffusion coefficient than in oxides on the Nb-containing samples. Neutron irradiation increases the deuterium diffusion coefficient, the deuterium concentration in the oxide and the pickup fraction in Zr-2.5 Nb samples. Comparative NanoSIMS and EDX/SEM analysis demonstrates that the deuterium is not preferentially trapped at second phase particles in the oxides on any of the alloys studied, but there is direct evidence for trapping at the surfaces of small oxide cracks especially in Zircaloy-4 samples. The high resolution mapping of these hot-spots in 3D can provide unique information on the mechanisms of hydrogen uptake, and suggests that the development of interconnected porosity in the oxide may be the critical rate-determining mechanism that controls HPU in the aqueous corrosion of zirconium alloys in water-cooled reactors.
Publication status:
Published
Peer review status:
Peer reviewed

Actions


Access Document


Files:
Publisher copy:
10.1016/j.actamat.2020.09.040

Authors


More by this author
Institution:
University of Oxford
Division:
MPLS
Department:
Materials
Role:
Author
ORCID:
0000-0002-9278-6463
More by this author
Institution:
University of Oxford
Division:
MPLS
Department:
Materials
Role:
Author
More by this author
Institution:
University of Oxford
Division:
MPLS
Department:
Materials
Role:
Author
More by this author
Institution:
University of Oxford
Division:
MPLS
Department:
Materials
Role:
Author
More by this author
Institution:
University of Oxford
Division:
MPLS
Department:
Materials
Role:
Author
ORCID:
0000-0002-3638-1445


Publisher:
Elsevier
Journal:
Acta Materialia More from this journal
Volume:
200
Pages:
581-596
Publication date:
2020-09-17
Acceptance date:
2020-09-14
DOI:
ISSN:
1359-6454


Language:
English
Keywords:
Pubs id:
1133690
Local pid:
pubs:1133690
Deposit date:
2020-09-25

Terms of use



Views and Downloads






If you are the owner of this record, you can report an update to it here: Report update to this record

TO TOP