- Abstract:
-
We have developed a 2-cm-diameter, shrouded wind turbine with an integrated axial flux permanent magnet generator. The device was fabricated using a combination of rapid prototyping, traditional machining and flexible printed circuit board technology, and employs jewel bearings for low friction. Wind tunnel tests have been performed on prototypes with 6 and 12 blades. The 12-blade design achieves a generator output power of 4.3 mW at a tunnel flow speed of 10 ms, and will operate at flow spee...
Expand abstract - Publication status:
- Published
- Peer review status:
- Peer reviewed
- Version:
- Accepted Manuscript
- Files:
-
-
(pdf, 1.2MB)
-
- Publisher copy:
- 10.1109/SENSOR.2009.5285378
-
Version unsuitable
-
We have not obtained a suitable full-text for a given research output. See this page for more information.
-
Recently completed
-
Sometimes content is held in ORA but is unavailable for a fixed period of time to comply with the policies and wishes of rights holders.
-
Permissions
-
All content made available in ORA should comply with relevant rights, such as copyright. See this page for more information.
-
Clearance
-
Some thesis volumes scanned as part of the digitisation scheme funded by Dr Leonard Polonsky are currently unavailable due to sensitive material or uncleared third-party copyright content. We are attempting to contact authors whose theses are affected.
- Publisher:
- IEEE Publisher's website
- Pages:
- 529-532
- Publication date:
- 2009-01-01
- DOI:
- URN:
-
uuid:e31ce9ef-6878-4eee-97ca-d36a08b4bddd
- Source identifiers:
-
297181
- Local pid:
- pubs:297181
- ISBN:
- 9781424441938
- Keywords:
- Copyright holder:
- IEEE
- Copyright date:
- 2009
- Notes:
- Copyright 2009 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
Conference
CM-scale air turbine and generator for energy harvesting from low-speed flows
Actions
Access Document
Why is the content I wish to access not available via ORA?
Bibliographic data (the information relating to research outputs) and full-text items (e.g. articles, theses, reports, etc.) arrive in ORA from several different sources. Unfortunately we are not able to make available the full-text for every research output.
Please contact the ORA team (
) if you have queries regarding unavailable content OR if you are aware of a full-text copy we can make available.
) if you have queries regarding unavailable content OR if you are aware of a full-text copy we can make available.
Content may be unavailable for the following four reasons
Alternative access to the full-text
You may be able to access the full-text directly from the publisher's website using the 'Publisher Copy' link in the 'Links & Downloads' box from a research output's ORA record page. This method may require an institutional or individual subscription to the journal/resource.
Authors
Bibliographic Details
Item Description
Terms of use
If you are the owner of this record, you can report an update to it here: Report update to this record