DC S command at Mon May 08 19:41:52 2017 (Version 1.171.37.35 (release 13-08-2014 CrysAlis171 .NET),compiled Aug 13 2014,18:06:29)
DC INFO: Current KM4 collision model (Atlas (SuperNova, Single source at offset, big cabinet))
ODBENCH SUPERN INFO: Open client 2 users
RAMP: SuperNova device initialized  (Ver. 2.2.3.26 - Final_Rev664_PCB1) (Mon May 08 19:41:52 2017)...
RAMP: SuperNova device locked OK. (Mon May 08 19:41:52 2017)
SuperNova device ramping to: kV=50.00,mA=0.80,ON
ODBENCH SUPERN INFO:  Mo lamp active in ramping!
SuperNova device write OK: kV=50.00,mA=0.80,ON
RAMP: SuperNova device unlock OK (Mon May 08 19:41:58 2017)
ODBENCH SUPERN INFO: Close client (others active)
RAMP: SuperNova device connection shutdown OK. GUI is still active. (Mon May 08 19:41:58 2017)
DC3DEVICES: CCSCAM  (Ver. 2.1.16.38)  device OK (no locking)
DC INFO: SuperN settings  50.00kV   0.80mA at Mon May 08 19:41:59 2017
Camera settings: 
CCD
   chip name  "KAF-4320E"
   channels 4
   height 2088
   width 2096
   active area     height 2088
     width 2096
     x 0
     y 0
HW
   ang brd pressent 1
   ang config loaded
   dsp firmware ok 1
   fpga firmware ok 1
   temperature ready 1
   ang brd type 1
MISC
   expander 221
   free space 206172
PICTURE
   param
     autoupload 1
     correction raw
     format raw
     ref type median
     analog channel 1
     binning 1
     originx 18
     originy 18
   state ref0 1358
   state ref1 1333
   state ref2 1518
   state ref3 855
VOLTAGES
   dac_ref1 100 mV
   dac_ref2 95 mV
   dac_ref3 78 mV
   dac_ref4 76 mV
   h1 amplitude 10000 mV
   h1 offset 0 mV
   h1l amplitude 10000 mV
   h1l amplitude -3000 mV
   h2 amplitude 10000 mV
   h2 offset -3000 mV
   reset amplitude 12000 mV
   reset offset 2000 mV
   v1 amplitude 8000 mV
   v1 offset -8000 mV
   v2 amplitude 8000 mV
   v2 offset -8000 mV
TIMINGS 1X1
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 60 ns
   h last 0 ns
   h width 600 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
TIMINGS 2X2
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 320 ns
   h last 220 ns
   h width 180 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
TIMINGS 4X4
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 300 ns
   h last 220 ns
   h width 180 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
System uptime 6w 3d 7h 42m 47s
EXPECTED FINISH TIME:  (0,1079,end:Mon May 08 21:19:15 2017)
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 1 frame 1 started at Mon May 08 19:41:59 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
DELETE INFO: Deleting dark image... (C:\Xcalibur\CrysalisPro171.37.35\Oxford Diffraction_darkimages\dc_dark_2048_2048_2_2_1000.dar)
- Acquisition of proper dark current map    1.000 sec
DC3DEVICES: CCDchiller  (Ver. 2.0.4.104 - Final_Rev575_PCB3)  device OK (no locking)
CCD INFO: Dark C:\Xcalibur\CrysalisPro171.37.35\Oxford Diffraction_darkimages\dc_dark_2048_2048_2_2_1000.dar written at Mon May 08 19:42:09 2017
Going to -21.00000 12.36557 77.00000 90.00000 55.00000
DC3DEVICES ERROR: XrayChiller init failed (NOTFOUND)!
XrayChiller device connection shutdown OK. Not inited (iInitAndLockDeviceDC3DEVICES).
REFERENCE MODEL INFO: New distance=100.00; x=1068.82; y=997.64; d1=0.211; d2=0.163; t0=0.562
REFERENCE MODEL INFO: New distance=55.00; x=1058.89; y=1000.57; d1=0.183; d2=0.150; t0=0.557
Run 1 started at Mon May 08 19:42:39 2017
Omega scan:  -21.000 to   91.000 (  112 frames,   1.000s) at t:  12.366,k:  77.000,p:  90.000,dd:  55.000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 1 frame 52 started at Mon May 08 19:47:01 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to 30.00000 12.36557 77.00000 90.00000 55.00000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 1 frame 102 started at Mon May 08 19:51:41 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to 80.00000 12.36557 77.00000 90.00000 55.00000
Run 1 ended

EXPECTED FINISH TIME:  (111,1079,end:Mon May 08 21:21:39 2017)
Going to -41.00000 -11.27182 57.00000 -180.00000 55.00000
REFERENCE MODEL INFO: New distance=100.00; x=1068.82; y=997.64; d1=0.211; d2=0.163; t0=0.562
REFERENCE MODEL INFO: New distance=55.00; x=1058.89; y=1000.57; d1=0.183; d2=0.150; t0=0.557
Run 2 started at Mon May 08 19:53:47 2017
Omega scan:  -41.000 to   63.000 (  104 frames,   1.000s) at t: -11.272,k:  57.000,p:-180.000,dd:  55.000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 2 frame 40 started at Mon May 08 19:57:14 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to -2.00000 -11.27182 57.00000 -180.00000 55.00000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 2 frame 90 started at Mon May 08 20:02:01 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to 48.00000 -11.27182 57.00000 -180.00000 55.00000
Run 2 ended

EXPECTED FINISH TIME:  (215,1079,end:Mon May 08 21:23:25 2017)
Going to -90.00000 -11.27182 -77.00000 -120.00000 55.00000
Run 3 started at Mon May 08 20:04:06 2017
Omega scan:  -90.000 to   22.000 (  112 frames,   1.000s) at t: -11.272,k: -77.000,p:-120.000,dd:  55.000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 3 frame 36 started at Mon May 08 20:07:08 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to -55.00000 -11.27182 -77.00000 -120.00000 55.00000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 3 frame 86 started at Mon May 08 20:11:46 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to -5.00000 -11.27182 -77.00000 -120.00000 55.00000
Run 3 ended

EXPECTED FINISH TIME:  (327,1079,end:Mon May 08 21:24:07 2017)
Going to -101.00000 -11.27182 -178.00000 -30.00000 55.00000
REFERENCE MODEL INFO: New distance=100.00; x=1068.82; y=997.64; d1=0.211; d2=0.163; t0=0.562
REFERENCE MODEL INFO: New distance=55.00; x=1058.89; y=1000.57; d1=0.183; d2=0.150; t0=0.557
Run 4 started at Mon May 08 20:15:01 2017
Omega scan: -101.000 to  -35.000 (   66 frames,   1.000s) at t: -11.272,k:-178.000,p: -30.000,dd:  55.000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
REFERENCE MODEL INFO: New distance=100.00; x=1068.82; y=997.64; d1=0.211; d2=0.163; t0=0.562
REFERENCE MODEL INFO: New distance=55.00; x=1058.89; y=1000.57; d1=0.183; d2=0.150; t0=0.557
Reference run 1 at DC run 4 frame 24 started at Mon May 08 20:17:24 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to -78.00000 -11.27182 -178.00000 -30.00000 55.00000
REFERENCE MODEL INFO: New distance=100.00; x=1068.82; y=997.64; d1=0.211; d2=0.163; t0=0.562
REFERENCE MODEL INFO: New distance=55.00; x=1058.89; y=1000.57; d1=0.183; d2=0.150; t0=0.557
Run 4 ended

EXPECTED FINISH TIME:  (393,1079,end:Mon May 08 21:25:10 2017)
Going to -100.00000 -11.27182 178.00000 -180.00000 55.00000
REFERENCE MODEL INFO: New distance=100.00; x=1068.82; y=997.64; d1=0.211; d2=0.163; t0=0.562
REFERENCE MODEL INFO: New distance=55.00; x=1058.89; y=1000.57; d1=0.183; d2=0.150; t0=0.557
Run 5 started at Mon May 08 20:22:42 2017
Omega scan: -100.000 to  -34.000 (   66 frames,   1.000s) at t: -11.272,k: 178.000,p:-180.000,dd:  55.000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 5 frame 8 started at Mon May 08 20:23:38 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to -93.00000 -11.27182 178.00000 -180.00000 55.00000
REFERENCE MODEL INFO: New distance=100.00; x=1068.82; y=997.64; d1=0.211; d2=0.163; t0=0.562
REFERENCE MODEL INFO: New distance=55.00; x=1058.89; y=1000.57; d1=0.183; d2=0.150; t0=0.557
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 5 frame 58 started at Mon May 08 20:28:46 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to -43.00000 -11.27182 178.00000 -180.00000 55.00000
Run 5 ended

EXPECTED FINISH TIME:  (459,1079,end:Mon May 08 21:27:26 2017)
Going to -62.00000 12.36557 -57.00000 -30.00000 55.00000
REFERENCE MODEL INFO: New distance=100.00; x=1068.82; y=997.64; d1=0.211; d2=0.163; t0=0.562
REFERENCE MODEL INFO: New distance=55.00; x=1058.89; y=1000.57; d1=0.183; d2=0.150; t0=0.557
Run 6 started at Mon May 08 20:30:45 2017
Omega scan:  -62.000 to   42.000 (  104 frames,   1.000s) at t:  12.366,k: -57.000,p: -30.000,dd:  55.000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 6 frame 42 started at Mon May 08 20:34:14 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to -21.00000 12.36557 -57.00000 -30.00000 55.00000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 6 frame 92 started at Mon May 08 20:38:45 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to 29.00000 12.36557 -57.00000 -30.00000 55.00000
Run 6 ended

EXPECTED FINISH TIME:  (563,1079,end:Mon May 08 21:27:27 2017)
Going to -64.00000 12.36557 -37.00000 150.00000 55.00000
Run 7 started at Mon May 08 20:40:25 2017
Omega scan:  -64.000 to   39.000 (  103 frames,   1.000s) at t:  12.366,k: -37.000,p: 150.000,dd:  55.000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 7 frame 38 started at Mon May 08 20:43:41 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to -27.00000 12.36557 -37.00000 150.00000 55.00000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 7 frame 88 started at Mon May 08 20:48:24 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to 23.00000 12.36557 -37.00000 150.00000 55.00000
Run 7 ended

EXPECTED FINISH TIME:  (666,1079,end:Mon May 08 21:28:34 2017)
Going to -87.00000 -11.27182 -37.00000 -180.00000 55.00000
Run 8 started at Mon May 08 20:50:33 2017
Omega scan:  -87.000 to   15.000 (  102 frames,   1.000s) at t: -11.272,k: -37.000,p:-180.000,dd:  55.000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 8 frame 35 started at Mon May 08 20:53:36 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to -53.00000 -11.27182 -37.00000 -180.00000 55.00000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 8 frame 85 started at Mon May 08 20:58:24 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to -3.00000 -11.27182 -37.00000 -180.00000 55.00000
Run 8 ended

EXPECTED FINISH TIME:  (768,1079,end:Mon May 08 21:29:46 2017)
Going to -20.00000 -11.27182 -99.00000 -60.00000 55.00000
Run 9 started at Mon May 08 21:00:29 2017
Omega scan:  -20.000 to   31.000 (   51 frames,   1.000s) at t: -11.272,k: -99.000,p: -60.000,dd:  55.000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 9 frame 33 started at Mon May 08 21:03:18 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to 12.00000 -11.27182 -99.00000 -60.00000 55.00000
Run 9 ended

EXPECTED FINISH TIME:  (819,1079,end:Mon May 08 21:29:19 2017)
Going to -55.00000 -11.27182 102.00000 -94.00000 55.00000
REFERENCE MODEL INFO: New distance=100.00; x=1068.82; y=997.64; d1=0.211; d2=0.163; t0=0.562
REFERENCE MODEL INFO: New distance=55.00; x=1058.89; y=1000.57; d1=0.183; d2=0.150; t0=0.557
Run 10 started at Mon May 08 21:05:47 2017
Omega scan:  -55.000 to   18.000 (   73 frames,   1.000s) at t: -11.272,k: 102.000,p: -94.000,dd:  55.000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 10 frame 32 started at Mon May 08 21:08:33 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to -24.00000 -11.27182 102.00000 -94.00000 55.00000
Run 10 ended

EXPECTED FINISH TIME:  (892,1079,end:Mon May 08 21:30:10 2017)
Going to -20.00000 12.36557 -99.00000 0.00000 55.00000
REFERENCE MODEL INFO: New distance=100.00; x=1068.82; y=997.64; d1=0.211; d2=0.163; t0=0.562
REFERENCE MODEL INFO: New distance=55.00; x=1058.89; y=1000.57; d1=0.183; d2=0.150; t0=0.557
Run 11 started at Mon May 08 21:12:57 2017
Omega scan:  -20.000 to   54.000 (   74 frames,   1.000s) at t:  12.366,k: -99.000,p:   0.000,dd:  55.000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 11 frame 9 started at Mon May 08 21:13:49 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to -12.00000 12.36557 -99.00000 0.00000 55.00000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 11 frame 59 started at Mon May 08 21:18:30 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to 38.00000 12.36557 -99.00000 0.00000 55.00000
Run 11 ended

EXPECTED FINISH TIME:  (966,1079,end:Mon May 08 21:31:34 2017)
Going to -66.00000 12.36557 -77.00000 90.00000 55.00000
Run 12 started at Mon May 08 21:20:32 2017
Omega scan:  -66.000 to   46.000 (  112 frames,   1.000s) at t:  12.366,k: -77.000,p:  90.000,dd:  55.000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 12 frame 35 started at Mon May 08 21:23:29 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to -32.00000 12.36557 -77.00000 90.00000 55.00000
Going to 0.00000 0.00000 0.00000 0.00000 55.00000
Reference run 1 at DC run 12 frame 85 started at Mon May 08 21:28:05 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
Going to 18.00000 12.36557 -77.00000 90.00000 55.00000
Run 12 ended

Going to 0.00000 0.00000 0.00000 0.00000 55.00000
REFERENCE MODEL INFO: New distance=100.00; x=1068.82; y=997.64; d1=0.211; d2=0.163; t0=0.562
REFERENCE MODEL INFO: New distance=55.00; x=1058.89; y=1000.57; d1=0.183; d2=0.150; t0=0.557
Reference run 1 at DC run 12 frame 112 started at Mon May 08 21:31:08 2017
Omega scan:    0.000 to    2.000 (    2 frames,   1.000s) at t:   0.000,k:   0.000,p:   0.000,dd:  55.000
DC3 INFO: waiting for end of 2nd write thread...
Camera settings: 
CCD
   chip name  "KAF-4320E"
   channels 4
   height 2088
   width 2096
   active area     height 2088
     width 2096
     x 0
     y 0
HW
   ang brd pressent 1
   ang config loaded
   dsp firmware ok 1
   fpga firmware ok 1
   temperature ready 1
   ang brd type 1
MISC
   expander 221
   free space 206172
PICTURE
   param
     autoupload 1
     correction raw
     format raw
     ref type median
     analog channel 1
     binning 1
     originx 18
     originy 18
   state ref0 1359
   state ref1 1336
   state ref2 1518
   state ref3 855
VOLTAGES
   dac_ref1 100 mV
   dac_ref2 95 mV
   dac_ref3 78 mV
   dac_ref4 76 mV
   h1 amplitude 10000 mV
   h1 offset 0 mV
   h1l amplitude 10000 mV
   h1l amplitude -3000 mV
   h2 amplitude 10000 mV
   h2 offset -3000 mV
   reset amplitude 12000 mV
   reset offset 2000 mV
   v1 amplitude 8000 mV
   v1 offset -8000 mV
   v2 amplitude 8000 mV
   v2 offset -8000 mV
TIMINGS 1X1
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 60 ns
   h last 0 ns
   h width 600 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
TIMINGS 2X2
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 320 ns
   h last 220 ns
   h width 180 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
TIMINGS 4X4
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 300 ns
   h last 220 ns
   h width 180 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
Data collection successfully finished at Mon May 08 21:31:20 2017
DC3DEVICES DEVICE INFO: Shutting down log devices...
DC3DEVICES DEVICE INFO: Shutting down Peltier device (CCSCAM) ...
CCSCAM device connection shutdown OK (pUnLockAndShutdownDC3DEVICES).
DC3DEVICES DEVICE INFO: Stopped Peltier device (CCSCAM) ...
DC3DEVICES DEVICE INFO: Shutting down CCD chiller device ...
CCDchiller device connection shutdown OK (pUnLockAndShutdownDC3DEVICES).
DC3DEVICES DEVICE INFO: Stopped CCD chiller device ...
Sending EMAILOPTION_EXPERIMENTEND 

Process information (Mon May 08 21:31:20 2017)
ID: 2156; threads 21; handles 869; mem 403304.00 (762336.00)kB; time: 2d 22h 56m 3s

MEMORY INFO: Memory PF:972.0, Ph:992.0, V:744.0; pDataCollectionHParentDistConcurrentDC3 25
MEMORY INFO: Process info - Handles: 870, Memory: PF:393.9,peak PF: 507.8, WS: 221.6, peak WS: 385.0
MEMORY INFO: CCD G:3.5,H:110.5 (#1033),V:1.3
Going to -21.50000 -21.50000 0.00000 0.00000 55.00000
CCD PAR INFO: Mode kept - Atlas 2x2 binning 1024x1024 pixels
DC PRE ACTION: destroy preexp4 structures (iwDestroyPreExp4PREEXP4)
DC PRE ACTION: pcleandatapreexp4 finally block started
DC PRE ACTION: pcleandatapreexp4 finally block ended
RAMPING INFO: Ramping after 01h 00m 00s 
ODBENCH SUPERN INFO: Open client 2 users
RAMP: SuperNova device initialized  (Ver. 2.2.3.26 - Final_Rev664_PCB1) (Mon May 08 22:31:26 2017)...
RAMP: SuperNova device locked OK. (Mon May 08 22:31:26 2017)
SuperNova device ramping to: kV=12.00,mA=0.05,ON
ODBENCH SUPERN INFO:  Mo lamp active in ramping!
SuperNova device write OK: kV=12.00,mA=0.05,ON
RAMP: SuperNova device unlock OK (Mon May 08 22:32:48 2017)
ODBENCH SUPERN INFO: Close client (others active)
RAMP: SuperNova device connection shutdown OK. GUI is still active. (Mon May 08 22:32:48 2017)
PRO INFO: start new pre-experiment
DC PRE ACTION: destroy preexp4 structures (iwDestroyPreExp4PREEXP4)
DC PRE ACTION: initialize preexp4 structures (iwInitializePreExp4PREEXP4)
DC PRE4 DELLAST
Collision check at 55.0mm
Collision test: OK
Current pos -21.50000 -21.50000 0.00000 0.00000 55.00000
Collision check at 54.2mm
Collision test: OK
DC PRE4 DELLAST
DC PRE ACTION: Call PreExperiment Options Dialog (Init)
DC PRE ACTION: Init dialog
DC PRE ACTION: formula
DC PRE ACTION: Ca1 K1 Fe4 As4
Current pos -21.50000 -21.50000 0.00000 0.00000 55.00000
Collision check at 54.2mm
Collision test: OK
DC PRE ACTION: New experiment name: exp_5486
DC PRE ACTION: End init dialog
DC PRE ACTION: New experiment name: C
DC PRE ACTION: New experiment name: Ca
DC PRE ACTION: New experiment name: CaK
DC PRE ACTION: New experiment name: CaKF
DC PRE ACTION: New experiment name: CaKFe
DC PRE ACTION: New experiment name: CaKFe4
DC PRE ACTION: New experiment name: CaKFe4A
DC PRE ACTION: New experiment name: CaKFe4As
DC PRE ACTION: New experiment name: CaKFe4As4
DC PRE ACTION: New experiment name: CaKFe4As4_
DC PRE ACTION: New experiment name: CaKFe4As4_S
DC PRE ACTION: New experiment name: CaKFe4As4_S5
DC PRE ACTION: CANCEL button was pressed
DC PRE ACTION: pcleanuppreexp4 start
DC PRE ACTION: pcleanuppreexp4 end
DC PRE ACTION: PreExperiment Options Dialog was closed, Return value: 2
DC PRE ACTION: Button F12 was pressed
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: IObox device initialized 2.0.3.0 Final_Rev750_PCB1(Tue May 09 11:39:15 2017)...
IOBOX: IObox device locked OK. (Tue May 09 11:39:15 2017)
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: switching on the light on sample 
IOBOX: IObox device unlock OK (Tue May 09 11:39:15 2017)
IOBOX: IObox connection device shutdown OK (Tue May 09 11:39:15 2017)
PILOT INFO: Going to      -57.0      -30.0      134.0       14.0      102.2  
REFERENCE MODEL INFO: New distance=102.16; x=1069.29; y=997.50; d1=0.212; d2=0.163; t0=0.563
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: IObox device initialized 2.0.3.0 Final_Rev750_PCB1(Tue May 09 11:39:43 2017)...
IOBOX: IObox device locked OK. (Tue May 09 11:39:43 2017)
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: IObox device unlock OK (Tue May 09 11:39:43 2017)
IOBOX: IObox connection device shutdown OK (Tue May 09 11:39:43 2017)
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: IObox device initialized 2.0.3.0 Final_Rev750_PCB1(Tue May 09 11:39:43 2017)...
IOBOX: IObox device locked OK. (Tue May 09 11:39:43 2017)
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: switching on the light on sample 
IOBOX: IObox device unlock OK (Tue May 09 11:39:43 2017)
IOBOX: IObox connection device shutdown OK (Tue May 09 11:39:43 2017)
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: IObox device initialized 2.0.3.0 Final_Rev750_PCB1(Tue May 09 11:39:44 2017)...
IOBOX: IObox device locked OK. (Tue May 09 11:39:44 2017)
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: IObox device unlock OK (Tue May 09 11:39:44 2017)
IOBOX: IObox connection device shutdown OK (Tue May 09 11:39:44 2017)
Current pos -57.00000 -30.00000 134.00000 14.00000 102.16422
Collision check at 54.2mm
Collision test: OK
DC PRE ACTION: Button F12 was pressed
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: IObox device initialized 2.0.3.0 Final_Rev750_PCB1(Tue May 09 11:39:49 2017)...
IOBOX: IObox device locked OK. (Tue May 09 11:39:49 2017)
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: switching on the light on sample 
IOBOX: IObox device unlock OK (Tue May 09 11:39:49 2017)
IOBOX: IObox connection device shutdown OK (Tue May 09 11:39:49 2017)
PILOT INFO: Going to      -57.0      -30.0      134.0       14.0      102.2  
PILOT INFO: Going to        0.0        0.0        0.0        0.0      102.2  
PILOT INFO: Going to      -57.0      -30.0      134.0       14.0      102.2  
PILOT INFO: Going to      -57.0      -30.0      134.0      104.0      102.2  
PILOT INFO: Going to      -57.0      -30.0      134.0      104.0      102.2  
PILOT INFO: Going to      -57.0      -30.0      134.0      194.0      102.2  
PILOT INFO: Going to      -57.0      -30.0      134.0      284.0      102.2  
PILOT INFO: Going to      -57.0      -30.0      134.0       14.0      102.2  
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: IObox device initialized 2.0.3.0 Final_Rev750_PCB1(Tue May 09 11:49:11 2017)...
IOBOX: IObox device locked OK. (Tue May 09 11:49:11 2017)
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: IObox device unlock OK (Tue May 09 11:49:11 2017)
IOBOX: IObox connection device shutdown OK (Tue May 09 11:49:11 2017)
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: IObox device initialized 2.0.3.0 Final_Rev750_PCB1(Tue May 09 11:49:12 2017)...
IOBOX: IObox device locked OK. (Tue May 09 11:49:12 2017)
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: switching on the light on sample 
IOBOX: IObox device unlock OK (Tue May 09 11:49:12 2017)
IOBOX: IObox connection device shutdown OK (Tue May 09 11:49:12 2017)
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: IObox device initialized 2.0.3.0 Final_Rev750_PCB1(Tue May 09 11:49:12 2017)...
IOBOX: IObox device locked OK. (Tue May 09 11:49:12 2017)
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: IObox device unlock OK (Tue May 09 11:49:12 2017)
IOBOX: IObox connection device shutdown OK (Tue May 09 11:49:12 2017)
Current pos -57.00000 -30.00000 134.00000 14.00000 102.16422
Collision check at 54.2mm
Collision test: OK
DC PRE ACTION: START button was pressed
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: IObox device initialized 2.0.3.0 Final_Rev750_PCB1(Tue May 09 11:49:15 2017)...
IOBOX: IObox device locked OK. (Tue May 09 11:49:15 2017)
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: switching on the light on sample 
IOBOX: IObox device unlock OK (Tue May 09 11:49:15 2017)
IOBOX: IObox connection device shutdown OK (Tue May 09 11:49:15 2017)
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: IObox device initialized 2.0.3.0 Final_Rev750_PCB1(Tue May 09 11:49:16 2017)...
IOBOX: IObox device locked OK. (Tue May 09 11:49:16 2017)
IOBOX READ: light in cabinet=0, light on sample=0
IOBOX: IObox device unlock OK (Tue May 09 11:49:16 2017)
IOBOX: IObox connection device shutdown OK (Tue May 09 11:49:16 2017)
Collision check at 55.0mm
Collision test: OK
RUN INFO: changed run order - saved 16 [s])
DC PRE ACTION: Set current directory to: C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5
DC PRE ACTION: Experiment file name: CaKFe4As4_S5
DC PRE ACTION: Write run list
DC PRE ACTION: Experiment detector distance: 55.00
DC PRE INFO: Experiment C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5\pre_CaKFe4As4_S5.run
DC PRE INFO: Expected chemical formula Ca1 K1 Fe4 As4
DC PRE INFO: Interactive strategy after pre-experiment: 1 
DC PRE INFO: Set total time: 0, time= 15.0000 hrs
DC PRE INFO: Strategy mode: Complete data, Redundancy 5.0000, Coverage limit 1.0000, Completeness limit 1.0000
DC PRE INFO: Experiment type laue_symmetry
DC PRE INFO: User resolution 0.800
DC PRE INFO: Set target I/sig: 1, Target I/sig= 15.0000
DC PRE INFO: Record movie during dc: 1
DC PRE INFO: Movie step 1 deg
DC PRE INFO: Detector distance mm= 55.0000
DC PRE INFO: D_min type: resolution
DC PRE INFO: Is Protein: 0
DC PRE INFO: Is Noncentrosymmetric Or Chiral: 0
DC PRE4
DC PRE ACTION: done ok end
DC PRE ACTION: enter istartpreexperimentpreexp
DC S "C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5\pre_CaKFe4As4_S5"
DC PRE ACTION: after WM_ODM_PRO_PROCCD_CHANGES_DATACOLLECTIONSETUP
*****************************************************************************************************************************
WARNING: Currently flood correction is off!
To achieve better results for any experiment turn the flood corrections on.
*****************************************************************************************************************************
DC INFO: DC settings kept unchanged (ini file file not found)
Collision check at 55.0mm
Collision test: OK
DC S INFO: User selected DC with skipped correlation in remeasured frames! This may yield data with spikes/zingers!
DC S INFO: Return while readout used!
DC S INFO: Write during acquire of next image used!
DC S INFO: Check beamstop and Lorentz area used!
System parameters: gain=90.0 (double-correlated-divide-by-2 gain)
DELETE INFO: Deleting experimental images... (C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5\frames\pre_CaKFe4As4_S5*.img)
DELETE INFO: Deleting bgfiles in tmp directory... (C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5\tmp\pre_CaKFe4As4_S5*.*)
Going to 28.00000 12.67807 -70.00000 90.00000 55.00000
REFERENCE MODEL INFO: New distance=55.00; x=1058.89; y=1000.57; d1=0.183; d2=0.150; t0=0.557
WD P/CAL INFO: C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5\pre_CaKFe4As4_S5Tue-May-09-11-49-52-2017.bup written
WD P/CAL INFO: C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5\pre_CaKFe4As4_S5.par written
DC INFO: geo file saved: C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5\a_21_090209.geo
DC INFO: ccd file saved: C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5\a_21_050209.ccd
DC INFO: C:\Xcalibur\corrections\a_21\a_21_050209.ccd copied
DC INFO: ffi file saved: C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5\Flood_switch_off_floodmo_a_21_calib_120209.ffiinffit
DC INFO: C:\Xcalibur\corrections\a_21\floodmo_a_21_calib_120209.ffiinffit copied
DELETE INFO: Deleting data red ini... (C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5\expinfo\pre_CaKFe4As4_S5_datared.ini)
DELETE INFO: Deleting crystal ini... (C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5\expinfo\pre_CaKFe4As4_S5_crystal.ini)
DELETE INFO: Deleting auto ini... (C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5\expinfo\pre_CaKFe4As4_S5_auto.ini)
DELETE INFO: Deleting rrp ini... (C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5\expinfo\pre_CaKFe4As4_S5_rrp.ini)
DELETE INFO: Deleting data collection ini... (C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5\expinfo\pre_CaKFe4As4_S5_datacoll.ini)
DC INFO: Dark trigger time: 120 mins (keep darks=1)
Run list: C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5\pre_CaKFe4As4_S5
Frames folder: C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S5\frames
