ODBENCH SUPERN INFO: Open client 2 users
RAMP: SuperNova device initialized  (Ver. 2.2.3.26 - Final_Rev664_PCB1) (Mon May 08 19:19:30 2017)...
RAMP: SuperNova device locked OK. (Mon May 08 19:19:30 2017)
SuperNova device ramping to: kV=50.00,mA=0.80,ON
ODBENCH SUPERN INFO:  Mo lamp active in ramping!
SuperNova device write OK: kV=50.00,mA=0.80,ON
RAMP: SuperNova device unlock OK (Mon May 08 19:19:36 2017)
ODBENCH SUPERN INFO: Close client (others active)
RAMP: SuperNova device connection shutdown OK. GUI is still active. (Mon May 08 19:19:36 2017)
DC3DEVICES: CCSCAM  (Ver. 2.1.16.38)  device OK (no locking)
DC INFO: SuperN settings  50.00kV   0.80mA at Mon May 08 19:19:36 2017
Camera settings: 
CCD
   chip name  "KAF-4320E"
   channels 4
   height 2088
   width 2096
   active area     height 2088
     width 2096
     x 0
     y 0
HW
   ang brd pressent 1
   ang config loaded
   dsp firmware ok 1
   fpga firmware ok 1
   temperature ready 1
   ang brd type 1
MISC
   expander 221
   free space 206172
PICTURE
   param
     autoupload 1
     correction raw
     format raw
     ref type median
     analog channel 1
     binning 1
     originx 18
     originy 18
   state ref0 1359
   state ref1 1335
   state ref2 1519
   state ref3 855
VOLTAGES
   dac_ref1 100 mV
   dac_ref2 95 mV
   dac_ref3 78 mV
   dac_ref4 76 mV
   h1 amplitude 10000 mV
   h1 offset 0 mV
   h1l amplitude 10000 mV
   h1l amplitude -3000 mV
   h2 amplitude 10000 mV
   h2 offset -3000 mV
   reset amplitude 12000 mV
   reset offset 2000 mV
   v1 amplitude 8000 mV
   v1 offset -8000 mV
   v2 amplitude 8000 mV
   v2 offset -8000 mV
TIMINGS 1X1
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 60 ns
   h last 0 ns
   h width 600 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
TIMINGS 2X2
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 320 ns
   h last 220 ns
   h width 180 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
TIMINGS 4X4
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 300 ns
   h last 220 ns
   h width 180 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
System uptime 6w 3d 7h 20m 25s
EXPECTED FINISH TIME:  (0,15,end:Mon May 08 19:24:05 2017)
Going to 28.00000 12.67807 -70.00000 90.00000 55.00000
Run 1 started at Mon May 08 19:19:37 2017
Omega scan:   28.000 to   33.000 (    5 frames,   5.000s) at t:  12.678,k: -70.000,p:  90.000,dd:  55.000
DELETE INFO: Deleting dark image... (C:\Xcalibur\CrysalisPro171.37.35\Oxford Diffraction_darkimages\dc_dark_2048_2048_2_2_5000.dar)
- Acquisition of proper dark current map    5.000 sec
DC3DEVICES: CCDchiller  (Ver. 2.0.4.104 - Final_Rev575_PCB3)  device OK (no locking)
DC3DEVICES ERROR: XrayChiller init failed (NOTFOUND)!
XrayChiller device connection shutdown OK. Not inited (iInitAndLockDeviceDC3DEVICES).
CCD INFO: Dark C:\Xcalibur\CrysalisPro171.37.35\Oxford Diffraction_darkimages\dc_dark_2048_2048_2_2_5000.dar written at Mon May 08 19:20:07 2017
Run 1 ended

EXPECTED FINISH TIME:  (4,15,end:Mon May 08 19:24:19 2017)
Going to 28.00000 -11.03744 70.00000 90.00000 55.00000
REFERENCE MODEL INFO: New distance=100.00; x=1068.82; y=997.64; d1=0.211; d2=0.163; t0=0.562
REFERENCE MODEL INFO: New distance=55.00; x=1058.89; y=1000.57; d1=0.183; d2=0.150; t0=0.557
Run 2 started at Mon May 08 19:21:27 2017
Omega scan:   28.000 to   33.000 (    5 frames,   5.000s) at t: -11.037,k:  70.000,p:  90.000,dd:  55.000
Run 2 ended

EXPECTED FINISH TIME:  (9,15,end:Mon May 08 19:24:35 2017)
Going to -57.00000 -11.03744 134.00000 14.00000 55.00000
Run 3 started at Mon May 08 19:22:47 2017
Omega scan:  -57.000 to  -52.000 (    5 frames,   5.000s) at t: -11.037,k: 134.000,p:  14.000,dd:  55.000
Run 3 ended

DC3 INFO: waiting for end of 2nd write thread...
Camera settings: 
CCD
   chip name  "KAF-4320E"
   channels 4
   height 2088
   width 2096
   active area     height 2088
     width 2096
     x 0
     y 0
HW
   ang brd pressent 1
   ang config loaded
   dsp firmware ok 1
   fpga firmware ok 1
   temperature ready 1
   ang brd type 1
MISC
   expander 221
   free space 206172
PICTURE
   param
     autoupload 1
     correction raw
     format raw
     ref type median
     analog channel 1
     binning 1
     originx 18
     originy 18
   state ref0 1358
   state ref1 1333
   state ref2 1518
   state ref3 855
VOLTAGES
   dac_ref1 100 mV
   dac_ref2 95 mV
   dac_ref3 78 mV
   dac_ref4 76 mV
   h1 amplitude 10000 mV
   h1 offset 0 mV
   h1l amplitude 10000 mV
   h1l amplitude -3000 mV
   h2 amplitude 10000 mV
   h2 offset -3000 mV
   reset amplitude 12000 mV
   reset offset 2000 mV
   v1 amplitude 8000 mV
   v1 offset -8000 mV
   v2 amplitude 8000 mV
   v2 offset -8000 mV
TIMINGS 1X1
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 60 ns
   h last 0 ns
   h width 600 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
TIMINGS 2X2
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 320 ns
   h last 220 ns
   h width 180 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
TIMINGS 4X4
   adc sample delay -80 ns
   adc sample width 40 ns
   amp time off 4000 ms
   amp time on 3000 ms
   h setup time 50000 ns
   h first 300 ns
   h last 220 ns
   h width 180 ns
   reset delay 0 ns
   reset width 80 ns
   sh delay -280 ns
   sh width 220 ns
   v1 middle width 40000 ns
   v1 negative width 40000 ns
   v1 positive width 40000 ns
   v2 delay 40000 ns
   v2 negative width 40000 ns
   v2 pulse width 40000 ns
Data collection successfully finished at Mon May 08 19:23:54 2017
DC3DEVICES DEVICE INFO: Shutting down log devices...
DC3DEVICES DEVICE INFO: Shutting down Peltier device (CCSCAM) ...
CCDchiller device connection shutdown OK (pUnLockAndShutdownDC3DEVICES).
CCSCAM device connection shutdown OK (pUnLockAndShutdownDC3DEVICES).
DC3DEVICES DEVICE INFO: Stopped Peltier device (CCSCAM) ...
DC3 INFO: Waiting for end of pre-experiment analysis...
Reading tabbin file: "C:\Data\MattBristow\CaKFe4As4\CaKFe4As4_S7\pre_CaKFe4As4_S7_peakhunt"
   No constraint
   UB - matrix:
       0.094397    0.060635   -0.043700   (  0.000201    0.000215    0.000086 )
      -0.061217   -0.141574   -0.029603   (  0.000216    0.000231    0.000093 )
      -0.144765    0.099426   -0.015623   (  0.000198    0.000212    0.000085 )
   M - matrix:
       0.033615   -0.000003   -0.000051   (  0.000074    0.000055    0.000019 )
      -0.000003    0.033605   -0.000012   (  0.000055    0.000082    0.000020 )
      -0.000051   -0.000012    0.003030   (  0.000019    0.000020    0.000010 )
   Constraint
   UB - matrix:
       0.094397    0.060635   -0.043700   (  0.000201    0.000215    0.000086 )
      -0.061217   -0.141574   -0.029603   (  0.000216    0.000231    0.000093 )
      -0.144765    0.099426   -0.015623   (  0.000198    0.000212    0.000085 )
   M - matrix:
       0.033505    0.000000    0.000000   (  0.000066    0.000000    0.000000 )
       0.000000    0.033505    0.000000   (  0.000000    0.000066    0.000000 )
       0.000000    0.000000    0.003048   (  0.000000    0.000000    0.000018 )
UB fit with 55 obs out of 75 (total:75,skipped:0) (73.33%)
    unit cell:
       3.869(5)  3.869(5) 12.886(18)       
      89.93(11) 89.71(11) 89.99(10)  
      V = 192.9(4) 
    unit cell:
       3.875(4)  3.875(4) 12.85(4)       
      90.0      90.0      90.0     
      V = 192.9(6) 

Process information (Mon May 08 19:26:14 2017)
ID: 2156; threads 20; handles 861; mem 404684.00 (754148.00)kB; time: 2d 20h 50m 57s

MEMORY INFO: Memory PF:968.0, Ph:984.0, V:744.0; pDataCollectionHParentDistConcurrentDC3 25
MEMORY INFO: Process info - Handles: 864, Memory: PF:395.2,peak PF: 507.5, WS: 222.7, peak WS: 385.0
MEMORY INFO: CCD G:3.5,H:110.5 (#1033),V:17.3
CCD PAR INFO: Correction kept - Dark subtraction: on; Flood correction: off
DC INFO: Automatic DC settings (binning: 2x2, correlation:ON)
