Journal article
Synthesis of surface grown Pt nanoparticles on edge-enriched MoS2 porous thin films for enhancing electrochemical performance
- Abstract:
- A hybrid catalyst, Pt nanocrystals deposited on the surface of MoS2 vertically standing nanoplatelets, is synthesized via chemical vapor deposition and subsequent thermal annealing (TA) of Pt precursor. The hybrid material shows promising results as an electrocatalyst for the hydrogen evolution reaction (HER). By varying Pt synthesis conditions—precursor loading and TA temperature—the deposition sites, size, and morphology of the Pt nanostructure can be controlled. The size effect of a Pt nanoparticle on catalytic activity and sintering resistance is discussed. Results show that higher Pt loading yields better HER performance despite smaller specific surface area; higher TA temperature delivers larger average particle size of Pt crystals and lower HER activity. Larger average size leads to fast sintering and thus poor durability of the catalyst. On the basis of the correlation between HER performance and growth behaviors of Pt on MoS2 surfaces, an optimization route for a highly active and stable cocatalyst can be established. The optimized Pt-MoS2 catalyst (400 °C, 11 wt %) reported in this study possesses superior overpotential of 9 mV (close to zero), Tafel slope of 44 mV/dec, and moderate exchange current density of 373 μA/cm2; it exhibits activity degradation of 140 mV @ 20 mA/cm2 after 10 000 cycles. The Tafel slope indicates the combination of Volmer–Heyrovsky steps as HER mechanism in this particular hybrid catalyst system. The outstanding HER activity attributes to highly dispersed Pt nanoparticles grown on MoS2 basal surfaces, large MoS2 edge density, and Pt–S bonding effect induced activity improvement of MoS2 as well as 3D porous network assisted superaerophobic surface.
- Publication status:
- Published
- Peer review status:
- Peer reviewed
Actions
Access Document
- Files:
-
-
(Preview, Accepted manuscript, pdf, 1.7MB, Terms of use)
-
- Publisher copy:
- 10.1021/acs.chemmater.8b03540
Authors
- Publisher:
- American Chemical Society
- Journal:
- Chemistry of Materials More from this journal
- Volume:
- 31
- Issue:
- 2
- Pages:
- 387-397
- Publication date:
- 2019-01-04
- Acceptance date:
- 2018-11-15
- DOI:
- EISSN:
-
1520-5002
- ISSN:
-
0897-4756
- Language:
-
English
- Keywords:
- Pubs id:
-
pubs:971172
- UUID:
-
uuid:b795248b-ade3-422b-915d-d5acc44a3648
- Local pid:
-
pubs:971172
- Source identifiers:
-
971172
- Deposit date:
-
2019-07-29
Terms of use
- Copyright holder:
- American Chemical Society
- Copyright date:
- 2019
- Rights statement:
- © 2019 American Chemical Society.
- Notes:
- This is the accepted manuscript version of the article. The final version is available online from American Chemical Society at: 10.1021/acs.chemmater.8b03540
If you are the owner of this record, you can report an update to it here: Report update to this record