Data Repository for the publication:

"Interaction shift of the Bose–Einstein condensation temperature in a dipolar gas"

by authors:

Milan Krstajić, Jiří Kučera, Lucas R. Hofer, Gavin Lamb, Péter Juhász, and Robert P. Smith


This repository contains four folders with the data related to the above publication:
- \Measurements -> all raw, averaged and rescaled data used in the paper, along with relevant calibration data
- \Fig2 -> all data from paper Figure 2
- \Fig3 -> all data from paper Figure 3
- \Fig4 -> all data from paper Figure 4


Details:

1.Measurements:

For each dataset, defined by the interaction parameter edd and trapping potential, we provide the following files:
- \Trap#_edd=#.###_[0/90]deg_raw.csv -> raw data points measured at [0/90] degrees dipole tilt and accepted by the filtering procedure defined in the paper
- \Trap#_edd=#.###_[0/90]deg_rawrej.csv -> raw data points measured at [0/90] degrees dipole tilt and rejected by the filtering procedure defined in the paper
- \Trap#_edd=#.###_[0/90]deg_avg.csv -> data points at [0/90] degrees dipole tilt after averaging and accepted by the filtering procedure defined in the paper
- \Trap#_edd=#.###_[0/90]deg_avgrej.csv -> data points at [0/90] degrees dipole tilt after averaging  and rejected by the filtering procedure defined in the paper
and if applicable (for series done at B =/= 1.40 G where additional calibration series were run)
- \Trap#_edd=#.###_CAL_raw.csv -> calibration series raw data points measured at [0/90] degrees dipole tilt and accepted by the filtering procedure defined in the paper
- \Trap#_edd=#.###_CAL_rawrej.csv -> calibration series raw data points measured at [0/90] degrees dipole tilt and rejected by the filtering procedure defined in the paper
- \Trap#_edd=#.###_CAL_avg.csv -> calibration series data points at [0/90] degrees dipole tilt after averaging and accepted by the filtering procedure defined in the paper
- \Trap#_edd=#.###_CAL_avgrej.csv -> calibration series data points at [0/90] degrees dipole tilt after averaging  and rejected by the filtering procedure defined in the paper

additionally, we provide a summary of calibration correction factors for all series in the file
- \calibrations.csv

Note that in cases where no data was rejected by filtering the appropriate files are empty.

2.Fig2:
- Fig2b.csv -> all the data plotted in the plots within Fig2b, with the "included" column representing the action of the data filter (discriminating between points plotted blue and gray)
- Fig2c_raw_0deg.csv -> raw points from the 0 degree dipole tilt series
- Fig2c_raw_90deg.csv -> raw points from the 90 degree dipole tilt series
- Fig2c_avg_0deg.csv -> averaged points from the 0 degree dipole tilt series
- Fig2c_avg_90deg.csv -> averaged points from the 90 degree dipole tilt series
- Fig2c_fits.csv -> parameters of the fitted trendlines

3.Fig3:
- Fig2b.csv -> all the data included on the plot and table within Figure 3

4.Fig4:
- Fig4a.csv -> points plotted in Fig4a
- Fig4b_exp.csv -> points from experimental measurements plotted in Fig4b
- Fig4b_sim.csv -> points from numerical simulations plotted in Fig4b
- Fig4c.csv -> points plotted in Fig4c

line data representing theoretical results is not included as it follows directly from equations supplied in the paper.