Thesis icon

Thesis

Processing and properties of nanostructured solid-state energy storage devices

Abstract:

A scalable spray processing technique was used to fabricate carbon nanotube (CNT)-based film electrodes and solid-state supercapacitors. The sprayed CNT-based electrodes comprised a randomly interconnected meso-porous network with a high electrical conductivity. Layer-by-layer (LbL) deposition of functionalised and oppositely charged single-wall carbon nanotubes (SWNTs) increased the electrode density and improved charging and discharging kinetics when compared with carboxylic functionalised only SWNT electrodes. The capacitance was further increased to 151 F g-1 at 2 mV s-1 and 120 F g-1 at 100 mV s-1 after vacuum and H2 heat treatments that removed the functional groups, and resulted in a hybrid microstructure of SWNTs and multi-layer graphene sheets from unzipped SWNTs.

Flexible solid-state supercapacitors were fabricated by directly spraying multi-wall carbon nanotube (MWNT)-based aqueous suspensions onto both sides of a Nafion membrane and dried. A single cell with MWNT-only electrodes had a capacitance of 57 F g-1 per electrode at 2 mV s-1 and 44 F g-1 at 150 mV s-1. Cells with MWNT/ionomer electrodes showed a higher H+ mobility and a lower charge transfer resistance, and the capacitance increased to 145 F g-1 at 2 mV s-1 and 91 F g-1 at 150 mV s-1.

Finally, MWNT/TiO2 nanoparticle/ionomer hybrid electrodes were used in the same solid-state supercapacitor configuration and provided a capacitance of 484 F g-1 per electrode at 5 mV s-1 and 322 F g-1 at 100 mV s-1. A qualitative model of the charge storage mechanism was developed, where TiO2 promoted H+ ions via redox reactions that fed protons into the proton-conducting ionomer coating over the MWNTs (in which the TiO2 was embedded), while electrons were readily conducted through the MWNT scaffold. This solid-state supercapacitor provided both attractive energy (31.8 Wh kg-1) and power (14.9 kW kg-1) densities, where such high energy density is difficult to achieve for MWNTs alone and such high power density is difficult for metal oxides alone, especially in the solid state.

Actions

Access Document

Files:

Authors

More by this author
Institution:
University of Oxford
Division:
MPLS
Department:
Materials
Oxford college:
Trinity College
Role:
Author

Contributors

Institution:
University of Oxford
Division:
MPLS
Department:
Materials
Role:
Supervisor


KETEP More from this funder
Funding agency for:
Huang, C


Publication date:
2012
DOI:
Type of award:
DPhil
Level of award:
Doctoral
Awarding institution:
University of Oxford


Language:
English
Keywords:
Subjects:
UUID:
uuid:f97b7c40-35cc-4cd8-96d4-9928ec62b368
Local pid:
ora:8275
Deposit date:
2014-04-04
ARK identifier:

Terms of use


Views and Downloads

Views and downloads will return soon






If you are the owner of this record, you can report an update to it here: Report update to this record

TO TOP