The mechanical properties of tendon

Thesis

Although the tensile mechanical properties of tendon have been well characterised, the viscoelastic and anisotropic properties remain uncertain. This thesis addresses the anisotropic and viscoelastic material properties of tendon. A method to characterise the three-dimensional shape of tendon is reported and experiments to characterise the fibre-aligned and fibre-transverse viscoelastic properties of tendon are presented.

The cross-sectional profiles of bovine digital extensor tendons were determined by a laser-slice method. Linear dimensions were measured within 0.15 mm and cross-sectional areas within 1.7 mm². Tendons were compressed between two glass plates in creep loading at multiple loads. Compression was then modelled in a finite element environment. Tendon was found to be nearly incompressible and reproduction of its isochronal load-displacement curve was achieved with a neo-Hookean material model (E ≃ 0.3 MPa). The fibre-aligned tensile mechanical properties were described using a Quasi-Linear Viscoelastic model. The model was effective at reproducing cyclic loading; however, it was ineffective at predicting stress relaxation outside the scope of data used to fit the model.

When all experimental results are considered together, two significant conclusions are made: (1) tendon is much stiffer in fibre-aligned tension than in fibre-transverse compression and (2) the fibre-aligned tensile response is strain dependant, while the transverse response is not.

Authors: Salisbury, S; S. T. S. Salisbury

• Publication date: 2008
• Type of award: DPhil
• Level of award: Doctoral
• Awarding institution: University of Oxford
• Language: English
• Keywords: tension; compression; anisotropic; viscoelastic; measurement; tendon
• Subjects: Mathematical modeling (engineering); Biomedical engineering; Materials modelling; Solid mechanics; Orthopaedics