Thesis
Hydrodynamics of ducted and open-centre tidal turbines
- Abstract:
-
This study presents a numerical investigation of ducted tidal turbines, employing three-dimensional Reynolds-averaged Navier-Stokes simulations. Bidirectional ducted turbines are modelled with and without aperture, referred to as ducted and open- centre turbines respectively.
The work consists of two investigations. In the first, the turbine rotors are represented by actuator discs, a simplification which captures changes in linear momentum and thus the primary interaction of the turbine with the flow through and around the duct, while greatly reducing computational complexity. In the second investigation, the turbine rotors are represented through a CFD-integrated blade element momentum model, employing realistic rotor data, capturing swirl and blade drag in addition to the extraction of linear momentum.
Both modelling techniques were employed to investigate the performances of bare, ducted, and open-centre turbines, relating these to the flow fields exhibited. For axial flow, substantial decreases in power generated by the ducted and open-centre turbines were found, relative to a bare turbine of equal total device diameter. For open-centre turbines, an increase in aperture size leads to a further reduction in power generated. Increased blockage was shown to positively affect the performance of all devices.
Two further measures of performance were employed: power density, normalising the power by the rotor area, and basin efficiency, relating the power generated to the overall power removed from the flow. Moderate increases in power density can be achieved for the ducted and open-centre devices, while their basin efficiencies are of similar value to that of the bare turbine.
For yawed inflow, the performance of the bare turbine decreases, whilst that of the ducted and open-centre turbines increases. This is due to an increased flow velocity following flow acceleration around the inlet lip of the duct and also an increase in effective blockage as ducts present greater projected frontal area when approached non-axially.
Actions
Access Document
- Files:
-
-
(Preview, Dissemination version, bin, 11.6MB, Terms of use)
-
Authors
Contributors
- Division:
- MPLS
- Department:
- Engineering Science
- Role:
- Supervisor
- Division:
- MPLS
- Department:
- Engineering Science
- Role:
- Supervisor
- Funder identifier:
- https://ror.org/0439y7842
- Funding agency for:
- Belloni, CSK
- Funding agency for:
- Belloni, CSK
- Publication date:
- 2013
- DOI:
- Type of award:
- DPhil
- Level of award:
- Doctoral
- Awarding institution:
- University of Oxford
- Language:
-
English
- Keywords:
- Subjects:
- UUID:
-
uuid:0721090a-d8b1-45f8-a47b-45d9cdc47222
- Local pid:
-
ora:9384
- Deposit date:
-
2014-11-25
- ARK identifier:
Terms of use
- Copyright holder:
- Clarissa Belloni
- Copyright date:
- 2013
If you are the owner of this record, you can report an update to it here: Report update to this record